How to replace the lower ball joint on Chevrolet SSR?

Beginning the lower Ball Joint replacement requires vehicle support while maintaining a raised position followed by wheel and tire detachment. Using a chisel detach the Steering Knuckle with its Wheel Hub and bearing before removing the lower Ball Joint flange. Use j 9519-e (J 9519-E Ball Joint Remover and Installer Set) and j 34874 (J 34874 Booster Seal Remover/Installer) to put the lower Ball Joint into position before extracting it from the lower Control Arm. To install the lower Ball Joint you must use the j 9519-e together with j 41435 (J 41435 Ball Joint Installer) and j 45105-2 (J 45105-2 Receiver). Install the j 9519-e and j 45105-1 (J 45105-1 Ball Joint Flaring Adapter) to the lower Ball Joint before flaring the lower Ball Joint flange. Install the Steering Knuckle together with its Wheel Hub and bearing before adding the tire and wheel after having removed the j 9519-e and j 45105-1. Turn off the vehicle then position it so it is at the lowest point before performing a front wheel alignment check.

OEM Chevrolet SSR Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

View related parts
Chevrolet SSR Lower Ball Joint, Front Part Number: 19133670
$57.43 MSRP: $140.12
You Save: $82.69 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 22157319
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Upper Ball Joint, Front Part Number: 19133638
$85.35 MSRP: $146.59
You Save: $61.24 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Stud, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaces: 22157320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet SSR Ball Joint

Want to cut long-term maintenance and repair costs? Choose OEM Ball Joint. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet SSR parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet SSR Ball Joint includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Ball Joint is one of the car parts that perfectly reflects such Chevrolet SSR models in which there were produced from 2003 to 2006. Playing an important role of connecting the control arms and steering knuckles, the Ball Joint consists of the combination of both the up and down as well as backward and forward movement which enable the suspension movement and steering input. It is specifically because of this flexibility that the dynamics of the Chevrolet SSR can be optimized and made even safer allowing it to better handle changes in the road and input from the driver. Made from steel, this Ball Joint comes with a rubber boot to last long a carry out lubrication and prevent contamination. More to the point, ball joints that are considered as loaded may be installed on the Chevrolet SSR, while additional performance parts that may be available comprise adjustable components for suspensions altered for performance. This also increases the car's handling and stability and at the same time provides flexibility in terms of SSR compatibility. Much has also been said about the Ball Joint among the different automotive parts used in today's vehicles because this particular ball joint model has been designed and constructed to provide longer durability while at the same time improving the suspension system of the SSR. Due to special attention to both safety and performance, Ball Joint is an essential component that contributes everything to the comfort and freedom of ride this vehicle gives to the SSR fans.

Chevrolet SSR Ball Joint Parts Questions & Experts Answers

Lower Ball Joint, Front
19133670
Q: How to replace the lower ball joint on Chevrolet SSR?
A:
Beginning the lower Ball Joint replacement requires vehicle support while maintaining a raised position followed by wheel and tire detachment. Using a chisel detach the Steering Knuckle with its Wheel Hub and bearing before removing the lower Ball Joint flange. Use j 9519-e (J 9519-E Ball Joint Remover and Installer Set) and j 34874 (J 34874 Booster Seal Remover/Installer) to put the lower Ball Joint into position before extracting it from the lower Control Arm. To install the lower Ball Joint you must use the j 9519-e together with j 41435 (J 41435 Ball Joint Installer) and j 45105-2 (J 45105-2 Receiver). Install the j 9519-e and j 45105-1 (J 45105-1 Ball Joint Flaring Adapter) to the lower Ball Joint before flaring the lower Ball Joint flange. Install the Steering Knuckle together with its Wheel Hub and bearing before adding the tire and wheel after having removed the j 9519-e and j 45105-1. Turn off the vehicle then position it so it is at the lowest point before performing a front wheel alignment check.