How to Replace a Shock Absorber Safely on Chevrolet SSR?

A vehicle lift with axle support becomes necessary before Shock Absorber replacement to secure the rear axle from falling freely because free motion endangers upper Control Arm and air suspension hardware. Support the rear axle before you can take out the Shock Absorber by uninstalling first the upper mounting bolt then the lower mounting bolt. The new Shock Absorber needs to be positioned before installing the lower mounting bolt which must be torqued to 80 nm (59 ft. Lbs.) until the upper mounting bolt is installed and torqued to the same value of 80 nm (59 ft. Lbs.). After removing rear axle support the vehicle will drop to the floor.

OEM Chevrolet SSR Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
Chevrolet SSR Shock Absorber, Front Driver Side Part Number: 15098726
$79.86 MSRP: $236.33
You Save: $156.47 (67%)
ADD TO CART
Product Specifications
- Other Name: Front Shock Absorber Kit; Suspension Assembly; Air Spring to Coil Conversion; Complete Strut Set; Strut; Absorber, Front And Rear Suspension; Shock
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS
View related parts
Chevrolet SSR Shock Absorber, Front Part Number: 15098725
$139.57 MSRP: $260.43
You Save: $120.86 (47%)
ADD TO CART
Product Specifications
- Other Name: Front Shock Absorber Kit; Suspension Assembly; Air Spring to Coil Conversion; Complete Strut Set; Strut; Absorber, Front And Rear Suspension; Shock
- Position: Front
- Replaces: 15063734
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS
View related parts
Chevrolet SSR Shock Absorber Part Number: 15267594
Product Specifications
- Other Name: Absorber Kit, Front And Rear Suspension; Suspension Shock Absorber; Shock; Strut
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Shock Absorber Part Number: 15209863
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Shock Absorber Set; Strut Shock Kit.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet SSR | Base | 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Shock Absorber Part Number: 15115532
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Shock Absorber Set; Strut Shock Kit.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet SSR Shock Absorber

Want to cut long-term maintenance and repair costs? Choose OEM Shock Absorber. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet SSR parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet SSR Shock Absorber includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet SSR Shock Absorber is very vital in the Chevrolet SSR model vehicles, it's suspension system and overall quality. Missioned to reduce shocks and impulses underneath the automobile, the Shock Absorber improves the quality of the ride and its stability, which is extremely useful when driving on different types of surfaces. Through the alteration of kinetic energy into heat, the Chevrolet SSR Shock Absorber, alongside springs, will assist in restricting any unwarranted movement and thus make for a fluid drive. These shock absorbers are equally good for the original Chevrolet SSR 2003- and 2004, as well as the later models of 2005-2006 They come with numerous options in regards to the construction, including the twin-tube and mono-tube. The twin-tube Shock Absorber has the strength and reliability, on the other hand, the mono-tube has the advantage in the dissipation of heat and speed. Other options such as PSD and ASD make the Shock Absorber even more sensitive to driving conditions and thus the improvement of efficiency and safety is also achieved. These high-quality Shock Absorbers prove somewhat useful in enhancing the stability and control of the Chevrolet SSR; this is a retractable hardtop convertible pickup truck. The automotive market is filled with lots of vehicles and out of them, the Chevrolet SSR Shock Absorber is unique in design and possesses the prime technologies that enhance a comfortable and safe drive. In general, the Chevrolet SSR Shock Absorber is vital for anyone who wants to feel the remarkable, reliable performance of their Chevrolet SSR vehicles and drive with confident protection.

Chevrolet SSR Shock Absorber Parts Questions & Experts Answers

Shock Absorber, Front Driver Side
15098726
Q: How to Replace a Shock Absorber Safely on Chevrolet SSR?
A:
A vehicle lift with axle support becomes necessary before Shock Absorber replacement to secure the rear axle from falling freely because free motion endangers upper Control Arm and air suspension hardware. Support the rear axle before you can take out the Shock Absorber by uninstalling first the upper mounting bolt then the lower mounting bolt. The new Shock Absorber needs to be positioned before installing the lower mounting bolt which must be torqued to 80 nm (59 ft. Lbs.) until the upper mounting bolt is installed and torqued to the same value of 80 nm (59 ft. Lbs.). After removing rear axle support the vehicle will drop to the floor.