Other Name: Arm, Rear Axle Control Arm; Upper Control Arm
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Chevrolet SSR Control Arm
Our website offers an extensive catalog of genuine Chevrolet SSR Control Arm at unbeatable prices. Every OEM Chevrolet SSR Control Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet SSR Control Arm Parts Questions & Experts Answers
Q: How to replace the rear axle upper control arm on Chevrolet SSR?
A: You must start by supporting the vehicle while it is raised after you remove the tire and wheel together with the wheelhouse liner. Support the rear axle so it rests at the designed d - height measurement. Remove the rear axle upper Control Arm to axle mounting bolt with its associated nut before uninstalling the rear axle upper Control Arm to frame mounting bolt to finally extract the rear axle upper Control Arm. The first step for installation is to install the rear axle upper Control Arm before you tighten it to the frame by hand. Before you install the rear axle upper Control Arm to the axle you must read the fastener information in the service precautions document. Tighten the mounting bolts on both rear axle upper control arms to 131 nm (97 ft. Lbs.). After removing the rear axle support replace the wheelhouse liner with your tire and wheel and lower the vehicle.