Other Name: Bulb, Capsule/Headlamp/Fog Lamp; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; High Beam Bulb; Parking Lamp Bulb; Fog Lamp Bulb; Lower Beam Bulb; Bulb
Replaced by: 13503417
Item Weight: 0.50 Pounds
Item Dimensions: 4.2 x 2.2 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 13586977
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Other Name: Bulb, Front Turn Signal Lamp; Daytime Running Light Bulb; Parking Light Bulb; Turn Signal Bulbs; Car Bulbs; Tail Lamp Bulb; Signal Lamp Bulb; Exterior Bulbs; Run Lamp Bulb; Stoplamp Bulb; Bulb; Standard Parts
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 Buick Rainier Submodels:
CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
2006 Buick Rainier Headlight Bulb
With a comprehensive array of OEM 2006 Buick Rainier Headlight Bulb, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rainier Headlight Bulb are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Buick Rainier Parts Questions & Experts Answers
Q: How to replace the front headlight bulb on 2006 Buick Rainier?
A: Begin the procedure to replace the headlamp bulb by switching off the lamp switch and waiting for the bulb to achieve normal operating temperature. Handle the bulb by its base while wearing protective eye gear because contact with glass and dirt or moisture should be avoided. Users should dispose of used bulbs properly and also store halogen bulbs away from the reach of children. Begin by opening the hood before removing the headlamp followed by unfastening the access cover that faces the rear of the headlamp. The electrical connector should be disconnected from its socket and you should turn the bulb and socket counter-clockwise to extract them from the housing. Install the electrical connector into the socket before you install new bulbs by using a high beam bulb for the black socket and using another low beam bulb that fits with the gray tip and gray socket. Install the housing by tightening the bulb and the socket clockwise until retaining tabs engage the housing then secure the access cover and replace the headlamp.