Other Name: Bulb, Capsule/Headlamp/Fog Lamp; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; High Beam Bulb; Parking Lamp Bulb; Fog Lamp Bulb; Lower Beam Bulb; Bulb
Replaced by: 13503417
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
Other Name: Bulb, Front Turn Signal Lamp; Daytime Running Light Bulb; Parking Light Bulb; Turn Signal Bulbs; Car Bulbs; Tail Lamp Bulb; Signal Lamp Bulb; Exterior Bulbs; Run Lamp Bulb; Stoplamp Bulb; Bulb; Standard Parts
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
Buick Rainier Headlight Bulb
Our website offers an extensive catalog of genuine Buick Rainier Headlight Bulb at unbeatable prices. Every OEM Buick Rainier Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Rainier Headlight Bulb Parts Questions & Experts Answers
Q: How to Safely Change a Headlight Bulb on Buick Rainier?
A: A proper bulb swap for bravada, envoy, envoy xuv and rainier requires a turning off of the lamp switch and allowing the bulb to reach safe handling temperatures. Eye protection should always be worn and you should handle the bulb by its base while keeping your hands away from the glass to prevent bulb shattering. Handle the bulb by its base only then keep it dry and clean before correct disposal of used bulbs. Start by opening the hood followed by removing the headlamp then continue by taking off the access cover that resides at the back of the headlamp. The electrical connector should be unlocked from its socket before rotating the bulb and socket components counterclockwise to separate them from the housing. Attach the electrical connector to its socket before you apply clockwise rotation to the bulb and socket for secure installation into the housing where retaining tabs should properly lock into position. Affix the access cover to the rear side of the headlamp assembly followed by reattachment of the headlamp unit. Select a black socket to fit high beam bulbs because low beam bulbs need a gray tip coupled with a gray socket.