How to replace the blower motor on 2006 Buick Rendezvous?

You should remove the right side instrument panel insulator before you replace the blower motor. After separating the connector from the blower motor, unscrew the mounts holding the blower motor in place and pull out the motor from the assembly. Insert the blower motor into the HVAC module and ensure it is held in place with the mounting screws, fastened to 1.8 N.m (16 lb in). Afterward, secure the blower motor's wire in the electrical connector and slide the right side instrument panel insulator back into place.

OEM 2006 Buick Rendezvous Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2006 Buick Rendezvous Blower Motor Part Number: 15809345
Product Specifications
- Other Name: Motor Assembly-Blower (W/Impeller); HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 10341214, 10424943, 10351192, 15103818, 15785328
- Item Weight: 6.10 Pounds
- Item Dimensions: 7.9 x 7.5 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15809345
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2006 Buick Rendezvous Blower Motor

With a comprehensive array of OEM 2006 Buick Rendezvous Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rendezvous Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Rendezvous Blower Motor Parts and Q&A

Q: How to replace the blower motor on 2006 Buick Rendezvous?
A: You should remove the right side instrument panel insulator before you replace the blower motor. After separating the connector from the blower motor, unscrew the mounts holding the blower motor in place and pull out the motor from the assembly. Insert the blower motor into the HVAC module and ensure it is held in place with the mounting screws, fastened to 1.8 N.m (16 lb in). Afterward, secure the blower motor's wire in the electrical connector and slide the right side instrument panel insulator back into place.