OEM 2006 Buick Rendezvous Crankshaft Position Sensor

2006 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the Crankshaft Position Sensor on 2006 Buick Rendezvous?

  A: Next, raise and support the vehicle. Let the converter hang out of the way and disconnect the coolant heater cord from the coolant heater in case it is fitted. Next, take off the ckp sensor'. Identifying the ckp symbol within the engine harness, unplug the engine harness electric collection from the ckp sensor, then take out the ckp sensor stud, after which the ckp sensor have to be taken away. If not replacing the sensor, check the ckp sensor o-ring for excessive wear and damage, and change the seal as needed. For installation, lubricate the sensor o-ring with the clean engine oil or replace it and install the ckp sensor and the ckp sensor stud, fasten the stud with 10 n.m (89 lb in). The engine harness electrical connector should be connected to the ckp sensor and the coolant heater cord should be reconnected to the heater just in case it is available. Park the converter and lower the car. Finally, execute the ckp system variation learn.