Make sure this part fits

GM 12574323
Crankshaft Position Sensor

2004-2007 GM

Customer Questions & Expert Answers (10)
GM 12574323 Crankshaft Position Sensor
  • Part Description
    Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor
  • Manufacturer
    General Motors
Make sure this part fits
$40.82 MSRP: $82.89
You Save: $42.07 (51%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Buick RendezvousCX, CXL6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    2005-2006 Chevrolet EquinoxLS, LT6 Cyl 3.4 L GAS
    2004-2006 Chevrolet MalibuLS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    2005-2006 Pontiac G6Base, GT6 Cyl 3.5 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006 Pontiac TorrentBase6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12574323 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12574323 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Crankshaft Position Sensor on Buick Rendezvous? Posted by Customer
    A:
    The first step when replacing the Crankshaft Position Sensor requires vehicle elevation followed by safety support. Move the Catalytic Converter out of the way before disconnecting the coolant heater cord from the coolant heater when present. You should start by disconnection of the engine harness electrical connector from the crankshaft position (CKP) sensor. Then remove the ckp sensor stud before you can take out the ckp sensor. Before placing a new sensor check the ckp sensor o-ring to see if it requires replacement due to wear or damage. Use clean engine oil to lubricate the sensor o-ring before installation of the ckp sensor. Standard replacement practice also applies here. Tighten the ckp sensor stud to 10 n.m (89 lb in). Connect the engine harness electrical connector back to the ckp sensor and reconnect the coolant heater cord to the heater unit (if heat is included) first lower the vehicle then position the Catalytic Converter and complete the ckp system variation learn procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after disconnecting the CKP sensor electrical connector for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the CKP sensor bolt and then remove the CKP sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What should be done for installation regarding the sensor O-ring for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Lubricate the sensor O-ring with clean engine oil or replace it if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What is the torque specification for the CKP sensor bolt during installation for the 2005 Buick Terraza? Posted by Customer
    A:
    Tighten it to 11 N.m (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What is the final step after installing the CKP sensor for the 2005 Chevrolet Equinox? Posted by Customer
    A:
    Reconnect the CKP sensor electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    How should the CKP sensor be installed for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Install the CKP sensor and secure it with the CKP sensor bolt, tightening it to 11 N.m (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What should be done after removing the attachment nuts for the 2004 Chevrolet Malibu? Posted by Customer
    A:
    Remove the lower and upper starter assembly to the engine block bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    When is the crankshaft position (CKP) system variation learn procedure necessary for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    It is necessary after performing engine replacement, ECM replacement, crankshaft damper replacement, crankshaft replacement, CKP sensor replacement, or any engine repairs that disturb the crankshaft to CKP sensor relationship, regardless of whether DTC P0315 is set.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What is the next step after disconnecting the electrical connector for the 2006 Chevrolet Equinox? Posted by Customer
    A:
    Remove the CKP sensor nut and take out the CKP sensor from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Position Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Crankshaft Position Sensor 12574323 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12574323 Crankshaft Position Sensor is available in the market under the name GM Crankshaft Position Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12574323 Crankshaft Position Sensor fits certain Chevrolet Malibu, Equinox, Uplander models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac G6, Torrent, Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 12574323 maintains top performance when functioning as the Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor unit. The component 12574323 is constructed from durable material and its dimensions span 3.1 x 2.1 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Crankshaft Sensor. The part 12574323 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.