How to replace the Crankshaft Position Sensor on 2005 Chevrolet Equinox?

To change Crankshaft Position (CKP) sensor, raise first the vehicle. The CKP sensor electrical connector should be disconnected, the CKP sensor nut then removed, and the CKP sensor obtained from the engine. If retaining the CKP sensor, check it for wear, cracks or leakage. For installation, each O-rings must be lubricated with the clean engine oil and, if the O-rings are damaged, they should be replaced. Mount the CKP sensor to the block and fasten it with the CKP sensor Nut in a figure 11 N.m (97 lb in). Finally, plug the CKP sensor plug back in, and you can lower the vehicle.

OEM 2005 Chevrolet Equinox Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2005 Chevrolet Equinox Crankshaft Position Sensor
Part Number: 12574323
$40.82 MSRP: $82.89
You Save: $42.07 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12574323
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS

2005 Chevrolet Equinox Crankshaft Position Sensor

With a comprehensive array of OEM 2005 Chevrolet Equinox Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Equinox Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Equinox Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2005 Chevrolet Equinox?
A: To change Crankshaft Position (CKP) sensor, raise first the vehicle. The CKP sensor electrical connector should be disconnected, the CKP sensor nut then removed, and the CKP sensor obtained from the engine. If retaining the CKP sensor, check it for wear, cracks or leakage. For installation, each O-rings must be lubricated with the clean engine oil and, if the O-rings are damaged, they should be replaced. Mount the CKP sensor to the block and fasten it with the CKP sensor Nut in a figure 11 N.m (97 lb in). Finally, plug the CKP sensor plug back in, and you can lower the vehicle.