How to replace the Crankshaft Position Sensor on 2006 Chevrolet Equinox?

The Crankshaft Position (CKP) Sensor would need to be lifted by, first. Disconnect the CKP sensor electrical connector. Take out the CKP sensor nut and remove the CKP sensor from the engine. If retained from the CKP sensor, check it for wear and cracks, its leakage. Upon installation, lubricate the O-Ring with clean engine oil, and replace the damaged O-rings if any of them are replaced. Install the CKP sensor to the block and hold it in place with the CKP sensor nut, and tighten it to 11 N.m (97 lb in). Then, plug the CKP sensor electrical connector and put the vehicle back down.

OEM 2006 Chevrolet Equinox Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2006 Chevrolet Equinox Crankshaft Position Sensor
Part Number: 12574323
$40.82 MSRP: $82.89
You Save: $42.07 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12574323
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS

2006 Chevrolet Equinox Crankshaft Position Sensor

With a comprehensive array of OEM 2006 Chevrolet Equinox Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2006 Chevrolet Equinox?
A: The Crankshaft Position (CKP) Sensor would need to be lifted by, first. Disconnect the CKP sensor electrical connector. Take out the CKP sensor nut and remove the CKP sensor from the engine. If retained from the CKP sensor, check it for wear and cracks, its leakage. Upon installation, lubricate the O-Ring with clean engine oil, and replace the damaged O-rings if any of them are replaced. Install the CKP sensor to the block and hold it in place with the CKP sensor nut, and tighten it to 11 N.m (97 lb in). Then, plug the CKP sensor electrical connector and put the vehicle back down.