OEM 2006 Chevrolet Equinox Spark Plug

2006 Chevrolet Equinox Spark Plug Parts Questions & Experts Answers

• Q: How to replace spark plugs safely and effectively on 2006 Chevrolet Equinox?

  A: Engine replacement should only happen when the engine reaches room temperature because engine seizing and Cylinder Head thread damage can occur. A proper cleaning of the Spark Plug recess area stops foreign materials from entering the Cylinder Head thus avoiding thread contamination that hinders new Spark Plug positioning. The motor requires original spark plugs designed for this specific vehicle model since alternative plug temperatures can permanently harm the engine components. To begin remove the Spark Plug Wires followed by removing the spark plugs from their position in the Cylinder Head. To install the spark plugs properly refer to ignition system specifications for the gaps and check all new and reconditioned plugs with a round wire feeler gauge since preset gaps might have altered since production. Developer install the spark plugs into the Cylinder Head by tightening each connector to 15 n.m (11 lb ft) using a thread chaser to clean threads that do not seat smoothly. Take care to avoid both cross-threading and plug misalignment because these issues can cause heat-related problems and exhaust leakages and thread damage. The initial Spark Plug installation on a new Cylinder Head requires 20 n.m (15 lb ft) torque whereas future installments need 15 n.m (11 lb ft). The final step is to fasten the Spark Plug Wires to each Spark Plug.