How to replace the MAP Sensor on 2006 Chevrolet Equinox?

You can start the MAP Sensor replacement by removing the electrical connector from the MAP Sensor. Begin by removing the bolt supporting the MAP Sensor and its bracket followed by extracting the MAP Sensor and remaining MAP Sensor port seal from the Intake Manifold. Place the MAP Sensor on the Intake Manifold followed by attaching the MAP Sensor retaining bracket and bolt . Tighten the bolt to 10 n.m (89 lb in). You must install the electrical MAP Sensor connector last.

OEM 2006 Chevrolet Equinox MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2006 Chevrolet Equinox M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2006 Chevrolet Equinox MAP Sensor

With a comprehensive array of OEM 2006 Chevrolet Equinox MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2006 Chevrolet Equinox?
A: You can start the MAP Sensor replacement by removing the electrical connector from the MAP Sensor. Begin by removing the bolt supporting the MAP Sensor and its bracket followed by extracting the MAP Sensor and remaining MAP Sensor port seal from the Intake Manifold. Place the MAP Sensor on the Intake Manifold followed by attaching the MAP Sensor retaining bracket and bolt . Tighten the bolt to 10 n.m (89 lb in). You must install the electrical MAP Sensor connector last.