How to replace the Crankshaft Position Sensor on Chevrolet Colorado?

You should start by lifting and supporting the vehicle to access the Crankshaft Position Sensor. Remove the connector from the crankshaft position sensor on the wiring harness, then loosen and take out the CKP sensor bolt and remove the CKP sensor from the engine block and discard the O-rings. During installation, attach new O-ring seals to the CKP sensor and apply some clean engine oil to them. Set the CKP sensor into the engine block and add the GM P/N 12346004 (Canadian P/N 10953480) sealer to the bolt's threads, being sure to observe the fastener instructions. Screw in the CKP sensor bolt with a torque of 10 Nm (89 lb in). Attach the electrical connector from the wiring harness to the CKP sensor , lower the vehicle, and carry out the crankshaft (CKP) system variation learn process.

How to replace the Crankshaft Position Sensor on Chevrolet S10?

Begin by raising the vehicle and follow up with steering linkage shield mounting bolt removal and then remove the steering linkage shield if your vehicle includes the underbody shield package. First disconnect the CKP sensor harness connector before you remove the mounting bolt to extract the CKP sensor from its location. The correct installation order for the new CKP sensor requires full seating before the mounting bolt tightening to prevent both erratic performance and DTC-related errors. Original O-ring will not be used when replacing parts. Before installing the new sensor replace its O-ring and apply clean engine oil as a lubricant on the O-ring. Safety-first involves cleaning any burrs from the mounting surface before installing the CKP sensor through its mounting bolt; use a torque of 9 N.m (80 lb in). Restore the CKP sensor harness connector before reattaching the steering linkage shield with mounting bolts that need tightening to 33 N.m (24 lb ft) torque. Before ending the repair process lower the vehicle and begin the CKP system variation learn procedure.

How to replace the Crankshaft Position Sensor on Chevrolet Tahoe?

You need to run the crankshaft position (CKP) system variation learn procedure after removing or changing the sensor. Start the replacement process by disconnecting the battery negative terminal while lifting the vehicle. Before installing the Starter disconnect the ckp sensor electrical connector. Empty the area surrounding the ckp sensor of debris before removing its retaining bolt to extract the sensor. Put the ckp sensor into position and fix it with the retaining fastener while ensuring the bolt reaches 25 n.m of torque (18 lb ft). Follow installation by reconnecting the ckp sensor electrical connector then reinstalling the Starter before lowering the vehicle and connecting the negative Battery Cable. The ckp system variation learn process should be completed as the final step.

OEM Chevrolet Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

65 Crankshaft Position Sensors found

View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12613030
$35.78 MSRP: $67.21
You Save: $31.43 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12590991
Fits the following Chevrolet Models:
- Equinox | 2008-2009 | Sport | 6 Cyl 3.6 L GAS
- Malibu | 2008-2009 | LT, LTZ | 6 Cyl 3.6 L GAS
- Traverse | 2009 | LS, LT, LTZ | 6 Cyl 3.6 L GAS
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12597254
$28.62 MSRP: $51.80
You Save: $23.18 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Trailblazer | 2008-2009 | Base, LT | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Camshaft Position Sensor
Part Number: 19417445
$65.22 MSRP: $122.48
You Save: $57.26 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
Fits the following Chevrolet Models:
- Astro | 1996-2005 | Base, LS, LT | 6 Cyl 4.3 L GAS
- Blazer | 1995-2005 | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- C1500 | 1997-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C1500 Suburban | 1997-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS
- C2500 | 1997-2000 | Base, Cheyenne, LS, Silverado, WT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1997-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C3500 | 1997-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- Express 1500 | 1996-2007 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Express 2500 | 1996-2006 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- Express 3500 | 1996-2002 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Knock Sensor
Part Number: 21024981
$31.97 MSRP: $60.05
You Save: $28.08 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaced by: 19434673
- Replaces: 21024729
Fits the following Chevrolet Models:
- Astro | 2001-2005 | Base, LS, LT | 6 Cyl 4.3 L GAS
- Blazer | 2001-2005 | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Express 1500 | 2003-2005 | Base, LS | 6 Cyl 4.3 L GAS
- Express 2500 | 2001-2005 | Base, LS | 6 Cyl 4.3 L GAS
- S10 | 2001-2004 | Base, LS, Xtreme, ZR2, ZR5 | 6 Cyl 4.3 L GAS
- Silverado 1500 | 2001-2004 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 55567243
$25.98 MSRP: $48.78
You Save: $22.80 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Cruze | 2011-2015 | L, LS | 4 Cyl 1.8 L FLEX, 4 Cyl 1.8 L GAS
- Cruze Limited | 2016 | L, LS, LT | 4 Cyl 1.8 L FLEX, 4 Cyl 1.8 L GAS
- Sonic | 2012-2018 | LS, LT, LTZ | 4 Cyl 1.8 L FLEX, 4 Cyl 1.8 L GAS
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 25198942
$42.31 MSRP: $79.46
You Save: $37.15 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 25182450, 96434780, 96253542
Fits the following Chevrolet Models:
- Aveo | 2004-2008 | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
- Aveo5 | 2007-2008 | LS, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12674702
$43.96 MSRP: $89.28
You Save: $45.32 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Camshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12627185, 12632872
Fits the following Chevrolet Models:
- Blazer | 2019-2021 | Base, L, LT | 4 Cyl 2.5 L GAS
- Camaro | 2016-2023 | LS, LT | 4 Cyl 2.0 L GAS
- Colorado | 2015-2022 | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS
- Corvette | 2023-2024 | Z06 | 8 Cyl 5.5 L GAS
- Equinox | 2018-2020 | LT, Premier | 4 Cyl 2.0 L GAS
- Impala | 2014-2019 | LS, LT, LTZ | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
- Malibu | 2013-2022 | LS, LT, LTZ, Premier | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- Malibu Limited | 2016 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
- Traverse | 2018-2019 | RS | 4 Cyl 2.0 L GAS
View More
View related parts
Chevrolet Crankshaft Position Sensor, Green Line
Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
Fits the following Chevrolet Models:
- Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX
- Cobalt | 2006-2010 | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
- Equinox | 2010-2017 | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
- HHR | 2006-2010 | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
- Impala | 2014 | Eco | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
- Malibu | 2007-2014 | Classic LS, Eco, Hybrid, LS, LT, LTZ | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12662533
$14.24 MSRP: $25.78
You Save: $11.54 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12638559
Fits the following Chevrolet Models:
- Cruze | 2016-2019 | L, LS, LT, Premier | 4 Cyl 1.4 L GAS
- Spark | 2016-2022 | ACTIV, LS, LT | 4 Cyl 1.4 L GAS
- Trax | 2021-2022 | LS, LT | 4 Cyl 1.4 L GAS
- Volt | 2016-2019 | LT, Premier | 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12789959
$28.77 MSRP: $54.03
You Save: $25.26 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Cobalt | 2005-2007 | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12664495
$16.68 MSRP: $31.32
You Save: $14.64 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Traverse | 2018-2023 | High Country, L, LS, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12672641
$36.18 MSRP: $73.50
You Save: $37.32 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 98079567
Fits the following Chevrolet Models:
- Express 2500 | 2010-2016 | Base | 8 Cyl 6.6 L DIESEL
- Express 3500 | 2010-2016 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
- Silverado 2500 HD | 2015-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2015-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 55555806
$95.84 MSRP: $194.63
You Save: $98.79 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
Fits the following Chevrolet Models:
- Aveo | 2009-2011 | LS, LT | 4 Cyl 1.6 L GAS
- Aveo5 | 2009-2011 | LS, LT | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12667201
$23.26 MSRP: $43.68
You Save: $20.42 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaced by: 12712848
Fits the following Chevrolet Models:
- Corvette | 2022 | Stingray | 8 Cyl 6.2 L GAS
- Silverado 1500 | 2016-2023 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Silverado 1500 LD | 2019 | Custom, LT, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 LTD | 2022 | Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Suburban | 2021-2023 | Commercial, High Country, LS, LT, Premier, RST, Z71 | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Tahoe | 2021-2023 | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 55492970
$31.23 MSRP: $58.64
You Save: $27.41 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Malibu | 2016-2019 | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12855170
$31.44 MSRP: $59.04
You Save: $27.60 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Cruze | 2014-2015 | Diesel | 4 Cyl 2.0 L DIESEL
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 55578624
$19.53 MSRP: $35.34
You Save: $15.81 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Cruze | 2017-2019 | Diesel, LT | 4 Cyl 1.6 L DIESEL
- Equinox | 2018-2019 | LT, Premier | 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Knock Sensor
Part Number: 12663209
$4.19 MSRP: $7.57
You Save: $3.38 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Blazer | 2020-2023 | LT, Premier | 4 Cyl 2.0 L GAS
- Colorado | 2023 | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
- Silverado 1500 | 2019-2023 | Custom, Custom Trail Boss, LT, LT Trail Boss, RST, WT | 4 Cyl 2.7 L GAS
- Silverado 1500 LTD | 2022 | Custom, Custom Trail Boss, LT, RST, WT | 4 Cyl 2.7 L GAS
- Trailblazer | 2021-2024 | ACTIV, LS, LT, RS | 3 Cyl 1.3 L GAS
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 55593759
$30.69 MSRP: $57.64
You Save: $26.95 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following Chevrolet Models:
- Colorado | 2016-2022 | LT, WT, Z71, ZR2 | 4 Cyl 2.8 L DIESEL
- Express 2500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
- Express 3500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View More
View related parts
Chevrolet Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
Fits the following Chevrolet Models:
- Avalanche 1500 | 2002-2006 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Camaro | 1998-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
- Corvette | 1997-2005 | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
- Express 1500 | 2003-2007 | Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Express 2500 | 2003-2007 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Express 3500 | 2003-2007 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Impala | 2006-2007 | SS | 8 Cyl 5.3 L GAS
- Monte Carlo | 2006-2007 | SS | 8 Cyl 5.3 L GAS
- SSR | 2003-2006 | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Silverado 1500 | 1999-2006 | Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View More

| Page 1 of 4 |Next >

1-20 of 65 Results

Chevrolet Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12703627
Q: How to replace the Crankshaft Position Sensor on Chevrolet Colorado?
A: You should start by lifting and supporting the vehicle to access the Crankshaft Position Sensor. Remove the connector from the crankshaft position sensor on the wiring harness, then loosen and take out the CKP sensor bolt and remove the CKP sensor from the engine block and discard the O-rings. During installation, attach new O-ring seals to the CKP sensor and apply some clean engine oil to them. Set the CKP sensor into the engine block and add the GM P/N 12346004 (Canadian P/N 10953480) sealer to the bolt's threads, being sure to observe the fastener instructions. Screw in the CKP sensor bolt with a torque of 10 Nm (89 lb in). Attach the electrical connector from the wiring harness to the CKP sensor , lower the vehicle, and carry out the crankshaft (CKP) system variation learn process.
Camshaft Position Sensor
19417445
Q: How to replace the Crankshaft Position Sensor on Chevrolet S10?
A: Begin by raising the vehicle and follow up with steering linkage shield mounting bolt removal and then remove the steering linkage shield if your vehicle includes the underbody shield package. First disconnect the CKP sensor harness connector before you remove the mounting bolt to extract the CKP sensor from its location. The correct installation order for the new CKP sensor requires full seating before the mounting bolt tightening to prevent both erratic performance and DTC-related errors. Original O-ring will not be used when replacing parts. Before installing the new sensor replace its O-ring and apply clean engine oil as a lubricant on the O-ring. Safety-first involves cleaning any burrs from the mounting surface before installing the CKP sensor through its mounting bolt; use a torque of 9 N.m (80 lb in). Restore the CKP sensor harness connector before reattaching the steering linkage shield with mounting bolts that need tightening to 33 N.m (24 lb ft) torque. Before ending the repair process lower the vehicle and begin the CKP system variation learn procedure.
Crankshaft Position Sensor
12560228
Q: How to replace the Crankshaft Position Sensor on Chevrolet Tahoe?
A: You need to run the crankshaft position (CKP) system variation learn procedure after removing or changing the sensor. Start the replacement process by disconnecting the battery negative terminal while lifting the vehicle. Before installing the Starter disconnect the ckp sensor electrical connector. Empty the area surrounding the ckp sensor of debris before removing its retaining bolt to extract the sensor. Put the ckp sensor into position and fix it with the retaining fastener while ensuring the bolt reaches 25 n.m of torque (18 lb ft). Follow installation by reconnecting the ckp sensor electrical connector then reinstalling the Starter before lowering the vehicle and connecting the negative Battery Cable. The ckp system variation learn process should be completed as the final step.