How to replace the Crankshaft Position Sensor (24X) on Chevrolet Lumina?

Starting by turning the ignition off, begin the crankshaft position (CKP) sensor (24X) replacement process by removing the serpentine Drive Belt from the Crankshaft Pulley. Start by lifting the vehicle on a hoist before removing the retaining bolt holding the Harmonic Balancer in place. Remove the balancer from its spot afterward. Record the sensor harness routing before unclipping with bolt and removing its electrical connector. The sensor bolts need removal followed by sensor extraction. The installation process involves placing the 24x Crankshaft Position Sensor with bolts while guiding the harness according to removal routing. The harness retaining clip requires installation with bolt while tightening bolts to 10 nm (8 lb ft). Connect the sensor electrical connector, reinstall the balancer on the crankshaft, and apply thread sealer gm #1052080 or equivalent to the threads of the crankshaft Harmonic Balancer bolt, tightening it to 150 nm (110 lb ft). After lowering the vehicle you must reinstall the serpentine Drive Belt then run the ckp system variation learn procedure.

OEM Chevrolet Lumina Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crankshaft Position Sensors found

View related parts
Chevrolet Lumina Crankshaft Position Sensor Part Number: 10456555
$36.47 MSRP: $74.07
You Save: $37.60 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 10456043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 Chevrolet Lumina | Base, Euro, LS, LTZ, Z34 | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Crankshaft Position Sensor Part Number: 10496122
$19.71 MSRP: $30.86
You Save: $11.15 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Lumina | Base | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Lumina Crankshaft Position Sensor Part Number: 12567648
$97.21 MSRP: $197.43
You Save: $100.22 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 24508212, 10231684, 12550965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Lumina | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Crankshaft Position Sensor Part Number: 10456161
$86.13 MSRP: $174.94
You Save: $88.81 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Crankshaft Position Sensor Part Number: 12567649
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 24506494, 24508213, 24506905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Crankshaft Position Sensor Part Number: 10226176
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 24504569
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Lumina | LS, LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Knock Sensor Part Number: 10456208
$62.55 MSRP: $111.70
You Save: $49.15 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 Chevrolet Lumina | Base, Euro, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS

Chevrolet Lumina Crankshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Lumina parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Lumina Crankshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Lumina Crankshaft Position Sensor is a highly important part which plays a major role in the improvement of the reliability along with the performance of Chevrolet Lumina automobiles. This sensor pays close attention to the position of the crankshaft and its revolutions and sends the information to the powertrain control module. Chevrolet Lumina Crankshaft Position Sensor thus helps to provide the most fuel-efficient levels of injection and ignition that are intuitive for the effective operation of the automobile's motor systems. This sensor is suitable for various Lumina models manufactured from 1989 to 2013, and due to the combination of its durability and accuracy, it is a favorite among Chevrolet lovers. One of the ways through which the Lumina has McDonnell normalize sensor technologies such as inductive as well as Hall Effect sensors which help in making it to work under different driving conditions. Chevrolet Lumina Crankshaft Position Sensor is well located on the crank pulley or flywheel to provide correct information which may avoid some starting trouble or strife off or stalling of the engine. That reliability is important for the stability of the car and ensuring that it runs as it was manufactured to, and without the danger of breaking down. On the same note, the Chevrolet Lumina Crankshaft Position Sensor occupies a special niche within automotive market primarily owing to its durability and resistance to the operating conditions, which contributes to the sensor's recognition as one of Chevrolet's strategic elements. All in all, Chevrolet Lumina Crankshaft Position Sensor plays a very significant role to enhance the performance and security of Chevrolet Lumina cars; therefore, it has become should have for the cars.

Chevrolet Lumina Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
10456555
Q: How to replace the Crankshaft Position Sensor (24X) on Chevrolet Lumina?
A:
Starting by turning the ignition off, begin the crankshaft position (CKP) sensor (24X) replacement process by removing the serpentine Drive Belt from the Crankshaft Pulley. Start by lifting the vehicle on a hoist before removing the retaining bolt holding the Harmonic Balancer in place. Remove the balancer from its spot afterward. Record the sensor harness routing before unclipping with bolt and removing its electrical connector. The sensor bolts need removal followed by sensor extraction. The installation process involves placing the 24x Crankshaft Position Sensor with bolts while guiding the harness according to removal routing. The harness retaining clip requires installation with bolt while tightening bolts to 10 nm (8 lb ft). Connect the sensor electrical connector, reinstall the balancer on the crankshaft, and apply thread sealer gm #1052080 or equivalent to the threads of the crankshaft Harmonic Balancer bolt, tightening it to 150 nm (110 lb ft). After lowering the vehicle you must reinstall the serpentine Drive Belt then run the ckp system variation learn procedure.