How to replace the Crankshaft Position Sensor (7X) on 2001 Chevrolet Lumina?

Start by shutting off the ignition while turning the wheel entirely to the left before beginning crankshaft position (CKP) sensor (7X) replacement. Raise your vehicle and disconnect the sensor electrical connector. Inspect the engine oil pan area for any signs of damage or wear, as these could affect the replacement process. Apply clean engine oil when installing the o-ring, always checking for signs of damage before replacement. Follow the fastener notice in cautions and notices to install the sensor onto the block. Reinstall the sensor attaching bolt and tighten it up to 8 nm (71 lb in). Complete the installation procedure by connecting the sensor electrical connector then lowering the vehicle.

OEM 2001 Chevrolet Lumina Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2001 Chevrolet Lumina Crankshaft Position Sensor
Part Number: 10456555
$35.75 MSRP: $72.61
You Save: $36.86 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 10456043
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base, Euro, LS, LTZ, Z34 | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Chevrolet Lumina Crankshaft Position Sensor
Part Number: 12567649
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 24506494, 24508213, 24506905
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.6 x 3.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567649
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

2001 Chevrolet Lumina Crankshaft Position Sensor

With a comprehensive array of OEM 2001 Chevrolet Lumina Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Lumina Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Lumina Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor (7X) on 2001 Chevrolet Lumina?
A: Start by shutting off the ignition while turning the wheel entirely to the left before beginning crankshaft position (CKP) sensor (7X) replacement. Raise your vehicle and disconnect the sensor electrical connector. Inspect the engine oil pan area for any signs of damage or wear, as these could affect the replacement process. Apply clean engine oil when installing the o-ring, always checking for signs of damage before replacement. Follow the fastener notice in cautions and notices to install the sensor onto the block. Reinstall the sensor attaching bolt and tighten it up to 8 nm (71 lb in). Complete the installation procedure by connecting the sensor electrical connector then lowering the vehicle.

Related 2001 Chevrolet Lumina Parts

Alternate Year Models

2000 Chevrolet Lumina Crankshaft Position Sensor