What tools are required to service and repair the harmonic balancer and crankshaft pulley on Chevrolet Lumina?

The repair of the Harmonic Balancer and Crankshaft Pulley needs both a Harmonic Balancer puller (J24420-C) and crankshaft balancer installer (J29113) as necessary tools. Start by disconnecting the Drive Belt and proceed to raise and properly support the vehicle. Begin service and repair by removing the right front wheel along with tire as the next step after right engine splash shield removal. Users must lower the frame by loosening the right frame bolts for access to the crankshaft balancer bolt. This bolt is removable using the Harmonic Balancer puller (J24420-C). The crankshaft balancer bolt together with washer needs removal before extracting the crankshaft balancer with the same tool. The keyway of the balancer requires gm p/n 12345739 or equivalent sealant before using the crankshaft balancer installer (J29113) to install the assembly that should be followed by removing the tool. The crankshaft balancer washer together with bolt needs installation followed by tightening the bolt to 103 nm (76 ft. Lbs.). The final step requires tightening the frame bolts followed by reinstallation of the right engine splash shield and right front wheel and tire and vehicle lowering and Drive Belt installation.

OEM Chevrolet Lumina Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Harmonic Balancers found

View related parts
Chevrolet Lumina Crankshaft Balance
Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Crankshaft Pulley
Part Number: 19420423
$64.91 MSRP: $110.52
You Save: $45.61 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.
- Replaces: 24504609
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2001 Chevrolet Lumina | Base, Euro, LS, LTZ | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Crankshaft Pulley
Part Number: 12563267
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24504737, 24507558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Vibration Damper
Part Number: 10044958
Product Specifications
- Other Name: Balancer, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Crankshaft Balance; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Vibration Damper
Part Number: 24504611
Product Specifications
- Other Name: Damper Assembly-Torsional; Crankshaft Balance; Torsion Damper; Damper; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1994 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Vibration Damper
Part Number: 24503077
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet Lumina | Euro, LS, LTZ, Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Crankshaft Pulley
Part Number: 24502908
Product Specifications
- Other Name: Pulley, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet Lumina | Euro, LS, LTZ, Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Vibration Damper
Part Number: 10162070
Product Specifications
- Other Name: Balancer Assembly-Crankshaft; Crankshaft Balance; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet Lumina | Euro, Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Crankshaft Pulley
Part Number: 10101369
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Pulley, Engine Crankshaft And Camshaft Balancer; Hub, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Lumina | Base | 4 Cyl 2.5 L GAS

Chevrolet Lumina Harmonic Balancer

Our website offers an extensive catalog of genuine Chevrolet Lumina Harmonic Balancer at unbeatable prices. Every OEM Chevrolet Lumina Harmonic Balancer comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Lumina Harmonic Balancer Parts Questions & Experts Answers

Crankshaft Pulley
19420423
Q: What tools are required to service and repair the harmonic balancer and crankshaft pulley on Chevrolet Lumina?
A: The repair of the Harmonic Balancer and Crankshaft Pulley needs both a Harmonic Balancer puller (J24420-C) and crankshaft balancer installer (J29113) as necessary tools. Start by disconnecting the Drive Belt and proceed to raise and properly support the vehicle. Begin service and repair by removing the right front wheel along with tire as the next step after right engine splash shield removal. Users must lower the frame by loosening the right frame bolts for access to the crankshaft balancer bolt. This bolt is removable using the Harmonic Balancer puller (J24420-C). The crankshaft balancer bolt together with washer needs removal before extracting the crankshaft balancer with the same tool. The keyway of the balancer requires gm p/n 12345739 or equivalent sealant before using the crankshaft balancer installer (J29113) to install the assembly that should be followed by removing the tool. The crankshaft balancer washer together with bolt needs installation followed by tightening the bolt to 103 nm (76 ft. Lbs.). The final step requires tightening the frame bolts followed by reinstallation of the right engine splash shield and right front wheel and tire and vehicle lowering and Drive Belt installation.

Related Chevrolet Lumina Parts

Browse Chevrolet Lumina Harmonic Balancer by Years

2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990