Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12563267
Crankshaft Pulley

1995-2005 GM

Customer Questions & Expert Answers (12)
GM 12563267 Crankshaft Pulley
GM 12563267 Crankshaft Pulley
GM 12563267 Crankshaft Pulley
GM 12563267 Crankshaft Pulley
  • Part Description
    Pulley; Harmonic Balancer Puller; Harmonic Balancer
  • Replaces
    24504737, 24507558
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 12563267 Crankshaft Pulley is Ref No. 27 in the diagram below

    1997 Chevy Camaro Crankshaft Pulley Diagram for 12563267
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12563267

  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-1999 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1995-1999 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1996-2004 Buick RegalCustom, Gran Sport, GS, Limited, LS, LSE, Olympic Gold Edition6 Cyl 3.8 L GAS
    1995-1997 Buick RivieraBase6 Cyl 3.8 L GAS
    1995-1997 Chevrolet CamaroBase, RS6 Cyl 3.8 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, Police, SS6 Cyl 3.8 L GAS
    1998-1999 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.8 L GAS
    1998-2005 Chevrolet Monte CarloIndianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z346 Cyl 3.8 L GAS
    1995-1999 Oldsmobile 8850th Anniversary Edition, Royale, Royale LS, Royale LSS6 Cyl 3.8 L GAS
    1995-1996 Oldsmobile 98Regency Elite6 Cyl 3.8 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12563267 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12563267 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the harmonic balancer on Buick Regal? Posted by Customer
    A:
    The first step to replace the crankshaft balancer begins with disconnecting the negative Battery Cable followed by removing the Drive Belt. Climb the vehicle before removing the right front wheel and tire and right engine splash shield keepers and the splash shield. Secondly remove the torque converter covers. You should employ the Flywheel holder (J 37096) to immobilize the Flywheel before removing the crankshaft balancer bolt and discarding it. Maintenance of the Crankshaft Pulley and balancer should happen jointly because separation between them is not recommended. Put on the crankshaft balancer remover (J 38197-A) to extract the crankshaft balancer from the system before removing the tool itself. Before installation the engine front cover seal surface on the crankshaft balancer requires engine oil treatment together with the corresponding seal area. Subsequently install the crankshaft balancer. The next step requires use of the Flywheel holder (J 37096) to cover the Flywheel. The service requires installing a new crankshaft balancer bolt which needs to be tightened to 150 nm (111 ft. Lbs.) followed by using the torque angle meter (J 36660-A) to rotate the bolt another 76°. The service requires removal of the Flywheel holder (J 37096) to reinstall the torque converter covers followed by right engine splash shield and retainers before installing the right front tire and wheel and lowering the vehicle to complete the operation by installing the Drive Belt. To finish the service run the ckp system variation learn procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the crankshaft balancer retaining bolt be installed for the 2000 Buick Regal? Posted by Customer
    A:
    Use the J37096 to keep the flywheel from turning and tighten the bolt to 150 Nm (111 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What are the torque specifications for the crankshaft balancer retaining bolt for the 2002 Buick Regal? Posted by Customer
    A:
    Tighten the bolt to 150 Nm (111 ft. lbs.) and use the Electronic Torque Angle Meter (J 36660-A) to rotate the bolt an additional 76 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What tool is used to remove the crankshaft balancer for the 2001 Buick Regal? Posted by Customer
    A:
    Install the Crankshaft Balancer Remover (J 38197-A) to remove the crankshaft balancer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the negative battery cable and remove the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done after tightening the retaining bolt for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the J 37096.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What tool may be needed during the installation process for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Use the Crankshaft Balancer Installer (J 29113) as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the installation procedure for the new crankshaft balancer for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Apply sealant GM P/N 12345739 (or equivalent) to the keyway of the balancer, then use the Crankshaft Balancer Installer (J29113) to install it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What tools are needed to replace the crankshaft balancer for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Crankshaft Balancer Remover (J 24420-C), Crankshaft Balancer Installer (J 29113), and Flywheel Holder (J 37096).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the final step in the process for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Lower the vehicle and install the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the torque specification for the crankshaft balancer bolt for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Tighten the bolt to 70 Nm (52 ft. lbs.) + 72 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Crankshaft Pulley 12563267 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12563267 Crankshaft Pulley is available in the market under the name GM Harmonic Balancer. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12563267 Crankshaft Pulley fits certain Chevrolet Camaro, Impala, Lumina models, as well as Buick Regal, Riviera, LeSabre. Additionally, it is compatible with Pontiac Firebird, Grand Prix, Bonneville and Oldsmobile 88, 98, Intrigue models.
The original GM component designated by manufacturer part number 12563267 maintains top performance when functioning as the Pulley; Harmonic Balancer Puller; Harmonic Balancer unit. The component 12563267 is constructed from durable material and its dimensions span 8.5 x 8.7 x 5.0 inches while weighing 7.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer. The part 12563267 has available replacement options 24504737, 24507558. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.