How to service and repair the harmonic balancer and crankshaft pulley on Chevrolet Monte Carlo?

Service and repair of the Harmonic Balancer and Crankshaft Pulley starts by extracting the Drive Belt and proceeding to lift the vehicle while providing proper vehicle support. Start by taking out the tire and wheel from the right front position followed by removing both the right engine splash shield and torque converter cover. Install the j 37096 (Flywheel Holder) as a Flywheel fixing device before you detach the crankshaft balancer retaining bolt yet maintain the connection of the Crankshaft Pulley to crankshaft balancer because both need assembly service. Detach the crankshaft balancer using j 38197 (Crankshaft Balancer Puller) before removing the tool. Engine oil serves for pre-installation lubrication between the front cover of the engine seal area on the crankshaft balancer along with the corresponding seal surface. Following this, install the crankshaft balancer assembly. Use the j 37096 to avoid Flywheel rotation while installing the crankshaft balancer retaining bolt to 150 nm (111 ft. Lbs.) torque setting before rotating it 76 degrees using the j 36660-a (Torque Angle Meter). The technician should remove the j 37096 tool before reinstalling the torque converter cover along with the right engine splash shield and right front tire and wheel. The vehicle must be lowered and the Drive Belt installed after which the ckp system variation learn procedure needs to be completed.

OEM Chevrolet Monte Carlo Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Harmonic Balancers found

View related parts
Chevrolet Monte Carlo Crankshaft Balance Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Pulley Part Number: 19420423
$66.20 MSRP: $112.73
You Save: $46.53 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.
- Replaces: 24504609
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Pulley Part Number: 12621646
$92.20 MSRP: $156.90
You Save: $64.70 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12581298, 12588034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Pulley Part Number: 560328
Product Specifications
- Other Name: Pulley Assembly- (3 Groove 7.320 Pd); Pulley, Engine Crankshaft And Camshaft Balancer; Pulley, Fan And Coolant Pump; Pulley, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Pulley Part Number: 14023148
Product Specifications
- Other Name: Pulley, Engine Crankshaft And Camshaft Balancer; Pulley Assembly, Engine Crankshaft; Pulley, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Monte Carlo | Base, SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Monte Carlo Vibration Damper Part Number: 12635650
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12568921
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Pulley Part Number: 12563268
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24507560
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LT, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Pulley Part Number: 12563267
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24504737, 24507558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Pulley Part Number: 14088682
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1988 Chevrolet Monte Carlo | Base, LS, SS | 8 Cyl 5.0 L GAS
View related parts
Chevrolet Monte Carlo Pulley Part Number: 10069912
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Monte Carlo Vibration Damper Part Number: 25523502
Product Specifications
- Other Name: Balancer Kit, Crankshaft; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Pulley Part Number: 25522581
Product Specifications
- Other Name: Pulley, Engine Crankshaft And Camshaft Balancer; Pulley Assembly, Engine Crankshaft; Pulley, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Vibration Damper Part Number: 24503077
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Pulley Part Number: 24502908
Product Specifications
- Other Name: Pulley, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Pulley Part Number: 14088683
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Monte Carlo Vibration Damper Part Number: 14082324
Product Specifications
- Other Name: Damper Assembly-Torsional; Harmonic Balancer Hub; Hub; Pulley; Damper; Damper, Engine Crankshaft And Camshaft Balancer; Damper, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Pulley Part Number: 14023145
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1986 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Vibration Damper Part Number: 12551948
Product Specifications
- Other Name: Pulley; Damper; Balancer, Engine Crankshaft And Camshaft Balancer; Damper, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 8 Cyl 5.0 L GAS

Chevrolet Monte Carlo Harmonic Balancer

Want to cut long-term maintenance and repair costs? Choose OEM Harmonic Balancer. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Harmonic Balancer includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

In Chevrolet Monte Carlo engines, the Harmonic Balancer is equally significant in balancing the engines and in the process reducing the vibrations resulting from the combustion process. This one is known as the vibration damper, actually, and include a metal hub connected to the crankshaft, a thick metal inertia ring, and a rubber ring that basically flexes to counteract the oscillation of the crankshaft. After some time of exposure to high temperature and fluids the rubber part degrades and results in excessive vibration and possible crank shaft damage. Different Chevrolet Monte Carlo cars have used standard harmonic balancer manufactured for OEM and other high performance ones. Standard balancer is provided to handle factory engine while there is performance harmonic balancers which are capable of handling modified engines and protecting them from all sorts of vibrations at all RPMs. These performance options include the traditional, viscous fluid and multi-piece type that have been safety tested at high RPMs accompanied by features such oil pressure relief valve, 360-degree timing marks for engine tuning among others.

Chevrolet Monte Carlo Harmonic Balancer Parts Questions & Experts Answers

Crankshaft Pulley
19420423
Q: How to service and repair the harmonic balancer and crankshaft pulley on Chevrolet Monte Carlo?
A:
Service and repair of the Harmonic Balancer and Crankshaft Pulley starts by extracting the Drive Belt and proceeding to lift the vehicle while providing proper vehicle support. Start by taking out the tire and wheel from the right front position followed by removing both the right engine splash shield and torque converter cover. Install the j 37096 (Flywheel Holder) as a Flywheel fixing device before you detach the crankshaft balancer retaining bolt yet maintain the connection of the Crankshaft Pulley to crankshaft balancer because both need assembly service. Detach the crankshaft balancer using j 38197 (Crankshaft Balancer Puller) before removing the tool. Engine oil serves for pre-installation lubrication between the front cover of the engine seal area on the crankshaft balancer along with the corresponding seal surface. Following this, install the crankshaft balancer assembly. Use the j 37096 to avoid Flywheel rotation while installing the crankshaft balancer retaining bolt to 150 nm (111 ft. Lbs.) torque setting before rotating it 76 degrees using the j 36660-a (Torque Angle Meter). The technician should remove the j 37096 tool before reinstalling the torque converter cover along with the right engine splash shield and right front tire and wheel. The vehicle must be lowered and the Drive Belt installed after which the ckp system variation learn procedure needs to be completed.