How to replace the harmonic balancer on 2001 Chevrolet Monte Carlo?

Begin the crankshaft balancer replacement process by taking off the Drive Belt followed by properly supporting the vehicle through suitable lifting. Begin by taking away the right front tire and wheel and then removing the right engine splash shield. Lower the frame by loosening the right-side frame bolts after supporting the frame. This step gives access to remove the crankshaft balancer bolt. Install the crankshaft balancer remover (J 24420-C) after removing the crankshaft balancer bolt and washer. The tool will extract the crankshaft balancer. The crankshaft balancer requires cleaning followed by inspection before assembling it. After repositioning the crankshaft balancer you should install a washer followed by the bolt and tighten the crankshaft balancer bolt to 103 nm (76 ft. Lbs.). Reinstall the frame after support before restore the right engine splash shield as well as the right front tire and wheel and lower the vehicle and install the Drive Belt. The crankshaft balancer installer (J 29113) comes into use during this procedure as needed.

OEM 2001 Chevrolet Monte Carlo Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Harmonic Balancers found

View related parts
2001 Chevrolet Monte Carlo Crankshaft Balance
Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.7 x 6.5 x 2.4 inches
- Condition: New
- SKU: 12618249
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Monte Carlo Crankshaft Pulley
Part Number: 19420423
$64.91 MSRP: $110.52
You Save: $45.61 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.
- Replaces: 24504609
- Condition: New
- SKU: 19420423
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Chevrolet Monte Carlo Crankshaft Pulley
Part Number: 12563267
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24504737, 24507558
- Item Weight: 7.00 Pounds
- Item Dimensions: 8.5 x 8.7 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12563267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS

2001 Chevrolet Monte Carlo Harmonic Balancer

With a comprehensive array of OEM 2001 Chevrolet Monte Carlo Harmonic Balancer, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Monte Carlo Harmonic Balancer are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the harmonic balancer on 2001 Chevrolet Monte Carlo?
A: Begin the crankshaft balancer replacement process by taking off the Drive Belt followed by properly supporting the vehicle through suitable lifting. Begin by taking away the right front tire and wheel and then removing the right engine splash shield. Lower the frame by loosening the right-side frame bolts after supporting the frame. This step gives access to remove the crankshaft balancer bolt. Install the crankshaft balancer remover (J 24420-C) after removing the crankshaft balancer bolt and washer. The tool will extract the crankshaft balancer. The crankshaft balancer requires cleaning followed by inspection before assembling it. After repositioning the crankshaft balancer you should install a washer followed by the bolt and tighten the crankshaft balancer bolt to 103 nm (76 ft. Lbs.). Reinstall the frame after support before restore the right engine splash shield as well as the right front tire and wheel and lower the vehicle and install the Drive Belt. The crankshaft balancer installer (J 29113) comes into use during this procedure as needed.