How to service and repair the Harmonic Balancer on Buick Regal?

Service and repair of the Harmonic Balancer begins with disconnecting the battery's negative grounding cable. Start by taking off the Drive Belt followed by lifting the vehicle then installing proper support. Begin by taking away both the right front tire and wheel followed by removal of right engine splash shield and torque converter cover. The Harmonic Balancer service requires installation of the j37096 (Flywheel Holder) to maintain the Flywheel position while you remove the Harmonic Balancer retaining bolt during maintenance. Ensure the Crankshaft Pulley stays connected to the Harmonic Balancer to treat them as one serviceable unit. After installing the j38197 (Harmonic Balancer Remover) you should remove the Harmonic Balancer while extracting the j38197 tool. After the application of engine oil to both the Harmonic Balancer interface on the engine front cover and the seal surface you can begin installing the Harmonic Balancer. Attach the Harmonic Balancer retaining bolt by using the j37096 to block the Flywheel's rotation and torque the bolt to 150 nm with an additional 76-degree rotation provided by the j36660-a (Electronic Torque Angle Meter). First remove tool j37096 followed by torque converter cover installation with right engine splash shield replacement and final right front wheel installation. Place the Drive Belt into position before reattaching the negative Battery Cable during the ground connection procedure. End the process by executing the ckp system variation learn procedure.

OEM Buick Regal Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Harmonic Balancers found

View related parts
Buick Regal Crankshaft Pulley Part Number: 90537704
$139.70 MSRP: $237.85
You Save: $98.15 (42%)
ADD TO CART
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.
- Replaces: 12787628, 12623793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Crankshaft Pulley Part Number: 12583151
$106.56 MSRP: $166.91
You Save: $60.35 (37%)
ADD TO CART
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance Pulley; Engine Crankshaft and Camshaft Balancer.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Buick Regal | CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Buick Regal Crankshaft Balance Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2004 Buick Regal | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Crankshaft Pulley Part Number: 12595291
$165.50 MSRP: $281.75
You Save: $116.25 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12623797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Vibration Damper Part Number: 25202078
$65.61 MSRP: $112.67
You Save: $47.06 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12657638, 12626962
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Crankshaft Pulley Part Number: 19420423
$66.20 MSRP: $112.73
You Save: $46.53 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.
- Replaces: 24504609
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1996 Buick Regal | Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Regal Pulley Part Number: 560328
Product Specifications
- Other Name: Pulley Assembly- (3 Groove 7.320 Pd); Pulley, Engine Crankshaft And Camshaft Balancer; Pulley, Fan And Coolant Pump; Pulley, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1987 Buick Regal | Base, Limited | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Vibration Damper Part Number: 88960263
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Crankshaft Damper; Crankshaft Balance; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24504738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Crankshaft Pulley Part Number: 88959268
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.
- Replaces: 24501201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Crankshaft Pulley Part Number: 12563267
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24504737, 24507558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2004 Buick Regal | Custom, Gran Sport, GS, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Crankshaft Pulley Part Number: 12563268
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24507560
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Crankshaft Pulley Part Number: 88960261
Product Specifications
- Other Name: Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.
- Replaces: 24503065
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Pulley Part Number: 10069912
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick Regal | Base, Limited | 8 Cyl 5.0 L GAS
View related parts
Buick Regal Pulley Part Number: 14088683
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick Regal | Base, Limited | 8 Cyl 5.0 L GAS
View related parts
Buick Regal Vibration Damper Part Number: 10044958
Product Specifications
- Other Name: Balancer, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Crankshaft Balance; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Regal Vibration Damper Part Number: 417142
Product Specifications
- Other Name: Balancer Assembly-Crankshaft; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick Regal | Base, Limited | 8 Cyl 5.0 L GAS
View related parts
Buick Regal Pulley Part Number: 25522581
Product Specifications
- Other Name: Pulley, Engine Crankshaft And Camshaft Balancer; Pulley Assembly, Engine Crankshaft; Pulley, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS
View related parts
Buick Regal Vibration Damper Part Number: 24504611
Product Specifications
- Other Name: Damper Assembly-Torsional; Crankshaft Balance; Torsion Damper; Damper; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1993 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Regal Vibration Damper Part Number: 25523502
Product Specifications
- Other Name: Balancer Kit, Crankshaft; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Regal Vibration Damper Part Number: 25523503
Product Specifications
- Other Name: Balancer; Balancer Kit, Engine Crankshaft And Camshaft Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL

| Page 1 of 2 |Next >

1-20 of 21 Results

Buick Regal Harmonic Balancer

Want to cut long-term maintenance and repair costs? Choose OEM Harmonic Balancer. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Harmonic Balancer includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

In essence, the Buick Regal Harmonic Balancer is one of the critical parts that can improve the versatility and durability of Buick Regal vehicles greatly. This critical part is planned to compensate the engine and reduce the torsional vibrations in the crankshaft thus enabling efficient working. Integrated of a rigid centre metal piece and a rubber coated inertia ring, the Buick Regal Harmonic Balancer mitigates the drag impact of piston assemblies to the crankshaft's twisting movement. Its durability is very important due to the sensitivity of rubber automotive part to heat and fluid which if executed can lead to a damage of the engine. Consequently, Buick Regal, different models starting from 1973 up to the newly developed series in 2011 has realized the importance of the Harmonic Balancer in efficiency and safety of the engine. Depending on the type of setup, the customer can achieve exact factory setup or tune for top performance with the options like traditional, viscous fluid or tunable multi-piece type balancers. This versatility therefore means that the Buick Regal Harmonic Balancer is capable of responding to the average driving as well as the rigorous performance situations. Most importantly, the balancer's design is according to the safety standard that makes it special in the automotive market. All in all, Buick Regal Harmonic Balancer provides the critical need for Buick Regal vehicles and has remain the high standard in the realm of reliability and efficiency of Buick Regal vehicles.

Buick Regal Harmonic Balancer Parts Questions & Experts Answers

Crankshaft Balance
12618249
Q: How to service and repair the Harmonic Balancer on Buick Regal?
A:
Service and repair of the Harmonic Balancer begins with disconnecting the battery's negative grounding cable. Start by taking off the Drive Belt followed by lifting the vehicle then installing proper support. Begin by taking away both the right front tire and wheel followed by removal of right engine splash shield and torque converter cover. The Harmonic Balancer service requires installation of the j37096 (Flywheel Holder) to maintain the Flywheel position while you remove the Harmonic Balancer retaining bolt during maintenance. Ensure the Crankshaft Pulley stays connected to the Harmonic Balancer to treat them as one serviceable unit. After installing the j38197 (Harmonic Balancer Remover) you should remove the Harmonic Balancer while extracting the j38197 tool. After the application of engine oil to both the Harmonic Balancer interface on the engine front cover and the seal surface you can begin installing the Harmonic Balancer. Attach the Harmonic Balancer retaining bolt by using the j37096 to block the Flywheel's rotation and torque the bolt to 150 nm with an additional 76-degree rotation provided by the j36660-a (Electronic Torque Angle Meter). First remove tool j37096 followed by torque converter cover installation with right engine splash shield replacement and final right front wheel installation. Place the Drive Belt into position before reattaching the negative Battery Cable during the ground connection procedure. End the process by executing the ckp system variation learn procedure.