Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 90537704
Crankshaft Pulley

2000-2017 GM

Customer Questions & Expert Answers (19)
GM 90537704 Crankshaft Pulley
GM 90537704 Crankshaft Pulley
GM 90537704 Crankshaft Pulley
GM 90537704 Crankshaft Pulley
  • Part Description
    Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Harmonic Balancer
  • Replaces
    12787628, 12623793
  • Manufacturer
    General Motors
Make sure this part fits
$139.70 MSRP: $237.85
You Save: $98.15 (42%)
1
ADD TO CART

  • 90537704 Crankshaft Pulley is Ref No. 40 in the diagram below

    2007 Chevy Cobalt Crankshaft Pulley Diagram for 90537704
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 90537704

  • Vehicle Fitment

    Year Make Model Trim Engine
    2010-2011 Buick LaCrosseCX, CXL4 Cyl 2.4 L GAS
    2011-2017 Buick RegalBase, CXL, Premium4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
    2012-2017 Buick VeranoBase, Convenience, Leather, Premium, Sport Touring, Turbo4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2002-2005 Chevrolet CavalierBase, LS, LS Sport4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2010-2017 Chevrolet EquinoxL, LS, LT, LTZ, Premier4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2004-2012 Chevrolet MalibuBase, Classic LS, LS, LT, LTZ4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2010-2017 GMC TerrainDenali, SL, SLE, SLT4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 90537704 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 90537704 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the harmonic balancer on Chevrolet Cavalier? Posted by Customer
    A:
    Begin by supporting the vehicle then take out the front tire together with the wheel and finally the front fender liner. Afterward disconnect the engine Drive Belt. The Harmonic Balancer holder j 38122-a should be used to stop the crankshaft rotation as you loosen the crankshaft balancer bolt before discarding it. Install the new crankshaft balancer while you must also install a new crankshaft balancer bolt following the fastener notice in service precautions. Apply the Harmonic Balancer holder (J 38122-A) to stop crankshaft rotation during crankshaft balancer bolt torque procedures which should be tightened to 100 nm (74 ft. Lbs.) with an additional 75-degree angular torque. The procedure ends by putting back the engine Drive Belt and front fender liner and front tire and wheel followed by vehicle lowering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the harmonic balancer on Chevrolet Classic? Posted by Customer
    A:
    Starting the crankshaft balancer replacement requires removal of the engine Drive Belt. While removing the crankshaft balancer bolt you should use the Harmonic Balancer holder (J 38122-A) to stop crankshaft rotation. Drain the crankshaft balancer bolt before extracting it then proceed to remove the crankshaft balancer. You should first mount the new crankshaft balancer onto the crankshaft before screwing in a new crankshaft balancer bolt. To prevent the crankshaft rotation during tightening apply the Harmonic Balancer holder (J 38122-A) while torquing the crankshaft balancer bolt to 100 nm (74 ft. Lbs.) plus 125 degrees. Reposition the engine Drive Belt as the final step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the harmonic balancer on Chevrolet HHR? Posted by Customer
    A:
    Before changing the crankshaft balancer the Drive Belt needs to be taken off first. The Harmonic Balancer holder (J 38122-A) prevents crankshaft rotation while you remove the crankshaft balancer bolt and discard the bolt. Install the new crankshaft balancer while positioning it correctly and drive in a new crankshaft balancer bolt. When tightening the crankshaft balancer bolt you should use the Harmonic Balancer holder (J 38122-A) to keep the crankshaft balancer stable. The angle meter (J 45059) indicates that the crankshaft balancer bolt should reach 100 n.m (74 lb ft) torque followed by an additional 125 degree turn. Finally, reinstall the Drive Belt.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the harmonic balancer on Chevrolet Malibu? Posted by Customer
    A:
    Start the crankshaft balancer replacement by taking off the engine Drive Belt. The Harmonic Balancer holder (J 38122-A) immobilizes the crankshaft during crankshaft balancer bolt loosening. After loosening, discard the bolt. The procedure moves to crankshaft balancer removal. Install the new crankshaft balancer onto the crankshaft before tightening an all-new crankshaft balancer bolt by following the fastener notice in service precautions. Present the crankshaft from rotating by using the Harmonic Balancer holder (J 38122-A) when you torque the new crankshaft balancer bolt to 100 nm (74 ft. Lbs.) followed by a 75-degree extension. The last step involves putting back the engine Drive Belt.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool should be installed next for the 2010 Buick LaCrosse? Posted by Customer
    A:
    Install the engine support fixture.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to service and repair the harmonic balancer and crankshaft pulley for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    First, remove the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    First, remove the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    First, remove the engine drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the final step after installing the new crankshaft balancer for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Reinstall the engine drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the torque specification for tightening the crankshaft balancer bolt for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Tighten the crankshaft balancer bolt to 100 Nm (74 ft. lbs.) plus an additional 125 degrees with the Angle Meter (J 45059).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done with the crankshaft balancer bolt for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Loosen and discard the crankshaft balancer bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2010 Chevrolet HHR? Posted by Customer
    A:
    First, remove the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What tool is needed to prevent the balancer from rotating while loosening the balancer bolt for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Install the Harmonic Balancer Holder (J 38122-A) and a breaker bar to the balancer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What needs to be removed to prevent flywheel rotation for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Remove the torque converter covers and install the Flywheel Holder (J 37096).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the next step after removing the old crankshaft balancer for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Position the new crankshaft balancer and install a new crankshaft balancer bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the final step after installing the new balancer for the 2009 Chevrolet Malibu? Posted by Customer
    A:
    Reinstall the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How do you install the new crankshaft balancer for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Place the new crankshaft balancer onto the crankshaft and install a NEW crankshaft balancer bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done with the crankshaft balancer bolt for the 2010 GMC Terrain? Posted by Customer
    A:
    Loosen the crankshaft balancer bolt, then remove and discard the bolt and the balancer itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Crankshaft Pulley 90537704 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 90537704 Crankshaft Pulley is available in the market under the name GM Harmonic Balancer. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 90537704 Crankshaft Pulley fits certain Chevrolet Malibu, Equinox, Classic models, as well as GMC Terrain. Additionally, it is compatible with Buick Regal, LaCrosse, Verano and Pontiac G6, Grand Am, G5 models.
The original GM component designated by manufacturer part number 90537704 maintains top performance when functioning as the Damper, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Harmonic Balancer unit. The component 90537704 is constructed from durable material and its dimensions span 8.1 x 8.2 x 4.0 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Vibration Damper; Crankshaft Damper; Pulley; Engine Crankshaft and Camshaft Balancer.. The part 90537704 has available replacement options 12787628, 12623793. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.