Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
Other Name: Bracket-T; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Motor Mount; Transmission Mount Bracket; Bracket, Transmission Mounting
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1990-1994 Chevrolet Lumina | Base, Euro | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
Other Name: Bracket, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Transmission Mount
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1990-1994 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
Chevrolet Lumina Motor And Transmission Mount
Our website offers an extensive catalog of genuine Chevrolet Lumina Motor And Transmission Mount at unbeatable prices. Every OEM Chevrolet Lumina Motor And Transmission Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Lumina Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to Inspect and Replace the Motor and Transmission Mount on Chevrolet Lumina?
A: To inspect a/t mount first a block of wood of the width of the Oil Pan bottom shall be inserted between the Oil Pan and jack support to prevent Oil Pan damage and potential engine disaster. One should check the source of the fluid that has been lost before any transmission/transaxle mount is replaced on suspicion of the fluid loss occurred elsewhere. Lift the transmission/transaxle away from the transmission/transaxle mount to relieve the weight for the mount and the creation of a slight amount of rubber tension. As you lift the transmission/transaxle, also notice the transmission/transaxle mount and replace it if it is hard rubber with heat check cracks on what is left of the hard rubber, if the rubber is separated from the metal plate it is supposed to be glued to, or if the rubber is split down the middle. When there is any movement between metal plate of transmission/transaxle mount and attachment points, lower the transmission/transaxle on transmission/transaxle mount and tighten bolts or nuts attached to transmission/transaxle mount to frame or transmission/transaxle mount bracket.