How to replace the Crankshaft Position Sensor on Chevrolet Camaro?

To change the crankshaft position (CKP), disconnect the negative Battery Cable first. Remove the serpentine belts from the Crankshaft Pulley, and then make use of a 28mm socket in removal of the crankshaft Harmonic Balancer retaining bolt. Use the balancer remover (J38197) and remove the crankshaft Harmonic Balancer. Next, pull off the Crankshaft Position Sensor shield without using pry bar, pull the sensor electrical connector, and remove the sensor from the block face. To install, mount the Crankshaft Position Sensor onto the face of the engine block and tighten the bolts to 20-40 n.m (14-28 lb ft). Return the Crankshaft Position Sensor shield to its place and reattach the electrical connector. Mount the balancer onto the crankshaft, apply thread sealer (GM-1052080) or equivalent on crankshaft balancer bolt threads, and tighten to 150n.m +76 degrees (110 lb ft +76 degrees). Lastly, install the serpentine accessory Drive Belt and reconnect the negative Battery Cable.

OEM Chevrolet Camaro Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Crankshaft Position Sensors found

View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 12674702
$44.84 MSRP: $91.06
You Save: $46.22 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Camshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12627185, 12632872
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 12669636
$28.91 MSRP: $54.30
You Save: $25.39 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12623094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 12646781
$14.45 MSRP: $27.14
You Save: $12.69 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 12615626
$17.35 MSRP: $32.60
You Save: $15.25 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 12560228
$58.99 MSRP: $119.82
You Save: $60.83 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 10456161
$86.13 MSRP: $174.94
You Save: $88.81 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 19170837
Product Specifications
- Other Name: Sensor Assembly, Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10456534, 10456237
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Camaro | Z28 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Knock Sensor Part Number: 10456287
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Control Module; ESC Sensor; Sensor
- Replaces: 10456017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Camaro | Z28 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 10137663
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 24503954
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chevrolet Camaro | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | SS, Z/28, ZL1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Crankshaft Position Sensor Part Number: 10456108
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chevrolet Camaro | Base | 6 Cyl 3.4 L GAS

Chevrolet Camaro Crankshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Crankshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Crankshaft Position Sensor in Chevrolet Camaro vehicles is a significant electronic that helps the car's engine to determine the crankshaft position as well as its rotational rate. This sensor sends vital signals to the powertrain control module and helps properly adjust ignition timing and fuel injection that are critical for a good engine function. Different types of CPS have been used in Chevrolet Camaro models, inductive, Hall Effect, magnetoresistive and optical sensors have been widely used. Inductive sensors are usually of a passive type and Hall Effect and magnetoresistive sensors are capable of detecting a static type of magnetic field. Optical sensors have a good ability to detect the edge but the problem is that they are more sensitive to fouling. The problems arise when the Crankshaft Position Sensor fails, this will lead to starting problems or stalling of the engine most especially under heat or vibration stress.

Chevrolet Camaro Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12560228
Q: How to replace the Crankshaft Position Sensor on Chevrolet Camaro?
A:
To change the crankshaft position (CKP), disconnect the negative Battery Cable first. Remove the serpentine belts from the Crankshaft Pulley, and then make use of a 28mm socket in removal of the crankshaft Harmonic Balancer retaining bolt. Use the balancer remover (J38197) and remove the crankshaft Harmonic Balancer. Next, pull off the Crankshaft Position Sensor shield without using pry bar, pull the sensor electrical connector, and remove the sensor from the block face. To install, mount the Crankshaft Position Sensor onto the face of the engine block and tighten the bolts to 20-40 n.m (14-28 lb ft). Return the Crankshaft Position Sensor shield to its place and reattach the electrical connector. Mount the balancer onto the crankshaft, apply thread sealer (GM-1052080) or equivalent on crankshaft balancer bolt threads, and tighten to 150n.m +76 degrees (110 lb ft +76 degrees). Lastly, install the serpentine accessory Drive Belt and reconnect the negative Battery Cable.