How to replace the harmonic balancer on Chevrolet Camaro?

The Drive Belt removal is the first step followed by vehicle lifting before starting Harmonic Balancer replacement. Next, remove the Starter motor. Replace the transmission brace bolts (2, 3) in sequence. After that remove the transmission brace before proceeding to unscrew the Flywheel housing inspection cover bolts followed by the cover. The removal process for 4l60-e automatic transmission requires the torque converter cover to be taken off. The Flywheel holding tool (J 37096) provides manifold support for the Flywheel during maintenance. Remove the Harmonic Balancer bolt and the key from the crankshaft. The Harmonic Balancer puller device (J 38197) enables balancer removal with j 38197-2 inverted to expose its leg toward the opposite direction of the balancer while installing silver bolts (J 38197-4) to the balancer before removing j 38197-1, j 38197-2, and j 38197-4. To install the new Harmonic Balancer apply engine oil on its seal surface and position the key slot properly on the balancer relative to the crankshaft before installing the key. Position the Harmonic Balancer bolt with 150 nm (111 ft. Lbs.) torque then perform an extra 114-degree torque with the torque angle meter (J 36660-A). You should install the Flywheel housing inspection cover with its bolts that need to be tightened at 48 nm (35 ft. Lbs.) into the m49 manual transmission system. Fasten both transmission brace bolts (2, 3) to a torque of 28 nm (21 ft. Lbs.) and follow with bolts which need to be tightened to 50 nm (37 ft. Lbs.). The last procedures include reinstalling the Starter motor followed by lowering the vehicle to install the Drive Belt before finalizing with the crankshaft position (CKP) system variation learn procedure.

OEM Chevrolet Camaro Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Harmonic Balancers found

View related parts
Chevrolet Camaro Crank Pulley
Part Number: 12617538
$47.18 MSRP: $77.23
You Save: $30.05 (39%)
ADD TO CART
Product Specifications
- Other Name: Balancer, Crankshaft; Vibration Damper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Crank Pulley
Part Number: 12674581
$588.79 MSRP: $1002.41
You Save: $413.62 (42%)
ADD TO CART
Product Specifications
- Other Name: Pulley; Vibration Damper; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12603916
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Crank Pulley
Part Number: 12675716
$475.52 MSRP: $771.74
You Save: $296.22 (39%)
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Vibration Damper; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12599862
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | Z/28 | 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Crank Pulley
Part Number: 12687728
$188.75 MSRP: $296.92
You Save: $108.17 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Vibration Damper; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12668109
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LT1, SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Crankshaft Balance
Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 12551537
$84.20 MSRP: $202.98
You Save: $118.78 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Balancer, Engine Crankshaft and Camshaft Dampener and Damper.
- Replaces: 06272221, 6272221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 25202078
$64.89 MSRP: $110.46
You Save: $45.57 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12657638, 12626962
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Camaro Crank Pulley
Part Number: 12713718
$400.40 MSRP: $629.99
You Save: $229.59 (37%)
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Vibration Damper; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12687725, 12671006
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Crank Pulley
Part Number: 12615141
$75.86 MSRP: $124.96
You Save: $49.10 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Crankshaft; Harmonic Balancer; Vibration Damper; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12702117
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Crankshaft Pulley
Part Number: 19418897
$239.48 MSRP: $407.69
You Save: $168.21 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley, Engine Crankshaft And Camshaft Balancer; Pulley
- Replaces: 10055879, 19367391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1992 Chevrolet Camaro | Base, Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 12700427
$71.62 MSRP: $112.17
You Save: $40.55 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Vibration Damper & Pulley; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12648346, 12674649
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Crankshaft Pulley
Part Number: 12563267
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24504737, 24507558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 12551138
Product Specifications
- Other Name: Balancer, Crankshaft; Harmonic Balancer; Pulley; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Indianapolis 500 Pace Car, Z28 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Pulley
Part Number: 14023148
Product Specifications
- Other Name: Pulley, Engine Crankshaft And Camshaft Balancer; Pulley Assembly, Engine Crankshaft; Pulley, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Camaro | Berlinetta, Iroc-Z, LT, Sport, Z28 | 8 Cyl 5.0 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 12553118
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Pulley
Part Number: 14100594
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1995 Chevrolet Camaro | Base, LT, RS, RS Heritage Edition, Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 12551948
Product Specifications
- Other Name: Pulley; Damper; Balancer, Engine Crankshaft And Camshaft Balancer; Damper, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28 | 8 Cyl 5.0 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 10146863
Product Specifications
- Other Name: Pulley; Dampener, Engine Crankshaft And Camshaft Balancer
- Replaces: 14100630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1995 Chevrolet Camaro | Base, RS, RS Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Camaro Vibration Damper
Part Number: 12563281
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Pulley
Part Number: 14023145
Product Specifications
- Other Name: Pulley Assembly-Crankshaft; Pulley, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Camaro | Berlinetta, Iroc-Z, Sport, Z28 | 8 Cyl 5.0 L GAS

| Page 1 of 2 |Next >

1-20 of 24 Results

Chevrolet Camaro Harmonic Balancer

Our website offers an extensive catalog of genuine Chevrolet Camaro Harmonic Balancer at unbeatable prices. Every OEM Chevrolet Camaro Harmonic Balancer comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Camaro Harmonic Balancer Parts Questions & Experts Answers

Crankshaft Balance
12618249
Q: How to replace the harmonic balancer on Chevrolet Camaro?
A: The Drive Belt removal is the first step followed by vehicle lifting before starting Harmonic Balancer replacement. Next, remove the Starter motor. Replace the transmission brace bolts (2, 3) in sequence. After that remove the transmission brace before proceeding to unscrew the Flywheel housing inspection cover bolts followed by the cover. The removal process for 4l60-e automatic transmission requires the torque converter cover to be taken off. The Flywheel holding tool (J 37096) provides manifold support for the Flywheel during maintenance. Remove the Harmonic Balancer bolt and the key from the crankshaft. The Harmonic Balancer puller device (J 38197) enables balancer removal with j 38197-2 inverted to expose its leg toward the opposite direction of the balancer while installing silver bolts (J 38197-4) to the balancer before removing j 38197-1, j 38197-2, and j 38197-4. To install the new Harmonic Balancer apply engine oil on its seal surface and position the key slot properly on the balancer relative to the crankshaft before installing the key. Position the Harmonic Balancer bolt with 150 nm (111 ft. Lbs.) torque then perform an extra 114-degree torque with the torque angle meter (J 36660-A). You should install the Flywheel housing inspection cover with its bolts that need to be tightened at 48 nm (35 ft. Lbs.) into the m49 manual transmission system. Fasten both transmission brace bolts (2, 3) to a torque of 28 nm (21 ft. Lbs.) and follow with bolts which need to be tightened to 50 nm (37 ft. Lbs.). The last procedures include reinstalling the Starter motor followed by lowering the vehicle to install the Drive Belt before finalizing with the crankshaft position (CKP) system variation learn procedure.