How to replace the Crankshaft Position Sensor on Chevrolet Silverado 2500?

To replace the crankshaft position (CKP) sensor, remove first the Starter and also disconnect the ckp sensor's electrical connector. Clean the area of the ckp sensor to avoid the debris from entering the engine, then take all the precautions to remove the bolthead of ckp sensor and remove ckp sensor. For installation, relocates the ckp sensor in place and install the ckp sensor bolt again make it tight with its torque as 25n. M (18 lb ft). Reconnect the electrical connector for ckp sensor and replace the Starter back. Finally, do the ckp system variation learn procedure.

OEM Chevrolet Silverado 2500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
Chevrolet Silverado 2500 Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

Chevrolet Silverado 2500 Crankshaft Position Sensor

Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Crankshaft Position Sensor at unbeatable prices. Every OEM Chevrolet Silverado 2500 Crankshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 2500 Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12560228
Q: How to replace the Crankshaft Position Sensor on Chevrolet Silverado 2500?
A: To replace the crankshaft position (CKP) sensor, remove first the Starter and also disconnect the ckp sensor's electrical connector. Clean the area of the ckp sensor to avoid the debris from entering the engine, then take all the precautions to remove the bolthead of ckp sensor and remove ckp sensor. For installation, relocates the ckp sensor in place and install the ckp sensor bolt again make it tight with its torque as 25n. M (18 lb ft). Reconnect the electrical connector for ckp sensor and replace the Starter back. Finally, do the ckp system variation learn procedure.

Related Chevrolet Silverado 2500 Parts

Browse Chevrolet Silverado 2500 Crankshaft Position Sensor by Years

2004 2003 2002 2001 2000 1999