How to replace the Crankshaft Position Sensor on Chevrolet Express 2500?

Begin the Crankshaft Position Sensor replacement operation with these steps: first turn the ignition and start switch to off or lock then disconnect the negative Battery Cable to avoid electrical sparks. Onstar(R) (UE1) vehicles with a back up battery require vehicle owners to wait until rap times out before disconnecting power to avoid damaging the back up battery. This precaution applies when the main vehicle battery or onstar(R) fuse requires removal while the ignition key remains in off mode. After lifting the car begin with Starter removal. The area surrounding the crankshaft position (CKP) sensor needs cleaning before disconnecting its electrical connector to improve engine debris prevention. After removing the retaining fastener, you should take out the ckp sensor by hand. Reinstall the retaining fastener by placing the ckp sensor in position before tightening it to 25 nm (18 lb ft). Following Starter installation reconnect the ckp sensor electrical connector while lowering the vehicle and restoring the negative Battery Cable. Complete the ckp system variation learn process as the last step.

OEM Chevrolet Express 2500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Crankshaft Position Sensors found

View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 12596851
$69.25 MSRP: $140.64
You Save: $71.39 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor; Position Sensor
- Replaces: 10456607, 10456532, 12562910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2006 Chevrolet Express 2500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 97365037
$75.79 MSRP: $153.94
You Save: $78.15 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2016 Chevrolet Express 2500 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 2500 Knock Sensor Part Number: 21024981
$32.61 MSRP: $61.25
You Save: $28.64 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaced by: 19434673
- Replaces: 21024729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Express 2500 | Base, LS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Express 2500 Camshaft Position Sensor Part Number: 19417445
$66.52 MSRP: $124.92
You Save: $58.40 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2006 Chevrolet Express 2500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 12669636
$28.91 MSRP: $54.30
You Save: $25.39 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12623094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Express 2500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 12560228
$58.99 MSRP: $119.82
You Save: $60.83 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 Chevrolet Express 2500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 55593759
$31.31 MSRP: $58.80
You Save: $27.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 12672641
$36.91 MSRP: $74.98
You Save: $38.07 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 98079567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Chevrolet Express 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 12557046
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Position Sensor
- Replaces: 10154687
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 2500 | Base, LS | 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Express 2500 Knock Sensor Part Number: 10456287
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Control Module; ESC Sensor; Sensor
- Replaces: 10456017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 2500 | Base, LS | 8 Cyl 5.0 L GAS
View related parts
Chevrolet Express 2500 Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2020 Chevrolet Express 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS

Chevrolet Express 2500 Crankshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Express 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Express 2500 Crankshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Express 2500 Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12703627
Q: How to replace the Crankshaft Position Sensor on Chevrolet Express 2500?
A:
Begin the Crankshaft Position Sensor replacement operation with these steps: first turn the ignition and start switch to off or lock then disconnect the negative Battery Cable to avoid electrical sparks. Onstar(R) (UE1) vehicles with a back up battery require vehicle owners to wait until rap times out before disconnecting power to avoid damaging the back up battery. This precaution applies when the main vehicle battery or onstar(R) fuse requires removal while the ignition key remains in off mode. After lifting the car begin with Starter removal. The area surrounding the crankshaft position (CKP) sensor needs cleaning before disconnecting its electrical connector to improve engine debris prevention. After removing the retaining fastener, you should take out the ckp sensor by hand. Reinstall the retaining fastener by placing the ckp sensor in position before tightening it to 25 nm (18 lb ft). Following Starter installation reconnect the ckp sensor electrical connector while lowering the vehicle and restoring the negative Battery Cable. Complete the ckp system variation learn process as the last step.