You must start the procedure of
Spark Plug wire replacement by taking off the engine cover. You can remove Spark Plug wires by twisting each wire 1/2 turn and grasping only the boot portion before pulling them away. To disconnect Spark Plug wires from the
Ignition Coil twist each boot 1/2 turn before pulling only at the boot end. The square designed melco(R) has Spark Plug wires that extend 145 mm (5.70 in) while the round designed delphi(R) extends 110 mm (4.30 in). There are two different manufacturers for the Spark Plug wires: the Spark Plug wire system includes two branded options: the melco(R) (square design) and the delphi(R) (round design). The two designs require separate Spark Plug wires and dedicated mounting brackets such as the melco(R) (square design) coil mounting bracket and the delphi(R) (round design) coil mounting bracket. The Spark Plug wire installation process begins by attaching wires from the coil to their corresponding spark plugs. Perform boot inspection by gently pushing each wire boot sideways to test the proper seating then reinstall loose boot components. Finally, reinstall the engine cover.