How to replace the Crankshaft Position Sensor on Chevrolet Monte Carlo?

Start your crankshaft position (CKP) sensor replacement by verifying the vehicle's ignition is off. Gather the necessary tools: the tool set required for this work consists of the torque/angle meter (J 36660-A), flywheel holding tool (J 37096), and balancer remover (J 38197). Start by removing serpentine belt(s) from the Crankshaft Pulley before raising the vehicle and removing right front wheel with attached tire as well as the right inner fender access cover. Remove the crankshaft Harmonic Balancer and Crankshaft Position Sensor shield by hand without applying a pry bar. Begin by disconnecting the ckp sensor electric connector. Then detach its bolts before extracting the sensor from the engine block's surface. You need to install the ckp sensor on the block while adding the bolts which should get tightened to 20-40 n.m (14-28 lb ft). Reposition the crankshaft Harmonic Balancer while reinstalling the Crankshaft Position Sensor shield followed by wiring the electrical connector to the shield. Replace the right front wheel and tire assembly along with the right inner fender access cover by securing wheel nuts at 140 n.m (104 lb ft). After platform-lowering complete the serpentine belt replacement and execute the ckp system variation learn procedure.

OEM Chevrolet Monte Carlo Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Crankshaft Position Sensors found

View related parts
Chevrolet Monte Carlo Crankshaft Position Sensor Part Number: 10456555
$36.47 MSRP: $74.07
You Save: $37.60 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 10456043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Position Sensor Part Number: 12567648
$97.21 MSRP: $197.43
You Save: $100.22 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 24508212, 10231684, 12550965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Position Sensor Part Number: 12560228
$58.99 MSRP: $119.82
You Save: $60.83 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Position Sensor Part Number: 12598208
$24.51 MSRP: $46.02
You Save: $21.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 12591007
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Position Sensor Part Number: 10456161
$86.13 MSRP: $174.94
You Save: $88.81 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Position Sensor Part Number: 12567649
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 24506494, 24508213, 24506905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Crankshaft Position Sensor Part Number: 10226176
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 24504569
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Knock Sensor Part Number: 10456208
$62.55 MSRP: $111.70
You Save: $49.15 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS

Chevrolet Monte Carlo Crankshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Crankshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Crankshaft Position Sensor in Chevrolet Monte Carlo is an important electronic part of the car that controls phase of the engine and sends impulses to the engine control mechanism. It is an important component that determines facets like the amount of fuel injected and when it is injected, and when the ignition should take place among other parameters of the engine. It plays an important role to work efficiently with engine and it can lead to start- up problems in case of failure. The type of the sensor may be inductive, Hall Effect, magnetoresistive, or optical, where each of them has certain strengths and certain weaknesses. In summing up, Crankshaft Position Sensor plays a critical role in smooth operation of the engines of the Chevrolet Monte Carlo cars.

Chevrolet Monte Carlo Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
10456161
Q: How to replace the Crankshaft Position Sensor on Chevrolet Monte Carlo?
A:
Start your crankshaft position (CKP) sensor replacement by verifying the vehicle's ignition is off. Gather the necessary tools: the tool set required for this work consists of the torque/angle meter (J 36660-A), flywheel holding tool (J 37096), and balancer remover (J 38197). Start by removing serpentine belt(s) from the Crankshaft Pulley before raising the vehicle and removing right front wheel with attached tire as well as the right inner fender access cover. Remove the crankshaft Harmonic Balancer and Crankshaft Position Sensor shield by hand without applying a pry bar. Begin by disconnecting the ckp sensor electric connector. Then detach its bolts before extracting the sensor from the engine block's surface. You need to install the ckp sensor on the block while adding the bolts which should get tightened to 20-40 n.m (14-28 lb ft). Reposition the crankshaft Harmonic Balancer while reinstalling the Crankshaft Position Sensor shield followed by wiring the electrical connector to the shield. Replace the right front wheel and tire assembly along with the right inner fender access cover by securing wheel nuts at 140 n.m (104 lb ft). After platform-lowering complete the serpentine belt replacement and execute the ckp system variation learn procedure.