How to replace the Crankshaft Position Sensor (7X) on 2004 Chevrolet Monte Carlo?

To Change the Crankshaft Position (CKP) Sensor (7X), account for steering wheel 100 degrees inward to the left side, and then raise the vehicle and secure. It is necessary to take off the right front wheel and uncouple the CKP sensor electrical connector. Next, remove the boot of the CKP sensor bolt and remove the CKP sensor without watching its wear, cracks or leakage unless it is going to be replaced. Before the installation, lubricate the O-ring with the clean engine oil and replace when needed. Mount the CKP sensor using the Fastener Notice in Service Precautions, and subsequently install the CKP sensor bolt and fasten it to 11 N.m (97 lb in). Connect the CKP sensor electrical connector, reinstall the right front wheel, lower the vehicle or remove the load in the vehicle, and perform the CKP system variation learn.

OEM 2004 Chevrolet Monte Carlo Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2004 Chevrolet Monte Carlo Crankshaft Position Sensor
Part Number: 10456555
$35.75 MSRP: $72.61
You Save: $36.86 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 10456043
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
2004 Chevrolet Monte Carlo Crankshaft Position Sensor
Part Number: 10456161
$84.43 MSRP: $171.50
You Save: $87.07 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456161
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Crankshaft Position Sensor
Part Number: 12567649
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 24506494, 24508213, 24506905
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.6 x 3.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567649
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

2004 Chevrolet Monte Carlo Crankshaft Position Sensor

With a comprehensive array of OEM 2004 Chevrolet Monte Carlo Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Monte Carlo Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor (7X) on 2004 Chevrolet Monte Carlo?
A: To Change the Crankshaft Position (CKP) Sensor (7X), account for steering wheel 100 degrees inward to the left side, and then raise the vehicle and secure. It is necessary to take off the right front wheel and uncouple the CKP sensor electrical connector. Next, remove the boot of the CKP sensor bolt and remove the CKP sensor without watching its wear, cracks or leakage unless it is going to be replaced. Before the installation, lubricate the O-ring with the clean engine oil and replace when needed. Mount the CKP sensor using the Fastener Notice in Service Precautions, and subsequently install the CKP sensor bolt and fasten it to 11 N.m (97 lb in). Connect the CKP sensor electrical connector, reinstall the right front wheel, lower the vehicle or remove the load in the vehicle, and perform the CKP system variation learn.

Related 2004 Chevrolet Monte Carlo Parts

Alternate Year Models

2003 Chevrolet Monte Carlo Crankshaft Position Sensor 2005 Chevrolet Monte Carlo Crankshaft Position Sensor