How to replace the Crankshaft Position Sensor on Chevrolet HHR?

Begin by unmounting the Starter before disconnecting the crankshaft position (CKP) sensor's electrical connector to replace the Crankshaft Position Sensor. First remove the ckp sensor bolt from the sensor then pull out the sensor. Before inserting the ckp sensor into the block you must inspect its o-ring and apply mineral-based grease before performing gentle insertion. Fasten the Crankshaft Position Sensor bolt with a torque of 10 n.m which equals 89 lb in. Reconnect the electrical connector for the ckp sensor then replace the Starter. The ckp system variation learn process should be executed last.

OEM Chevrolet HHR Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
Chevrolet HHR Crankshaft Position Sensor, Green Line
Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

Chevrolet HHR Crankshaft Position Sensor

Our website offers an extensive catalog of genuine Chevrolet HHR Crankshaft Position Sensor at unbeatable prices. Every OEM Chevrolet HHR Crankshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor, Green Line
12588992
Q: How to replace the Crankshaft Position Sensor on Chevrolet HHR?
A: Begin by unmounting the Starter before disconnecting the crankshaft position (CKP) sensor's electrical connector to replace the Crankshaft Position Sensor. First remove the ckp sensor bolt from the sensor then pull out the sensor. Before inserting the ckp sensor into the block you must inspect its o-ring and apply mineral-based grease before performing gentle insertion. Fasten the Crankshaft Position Sensor bolt with a torque of 10 n.m which equals 89 lb in. Reconnect the electrical connector for the ckp sensor then replace the Starter. The ckp system variation learn process should be executed last.