How to replace the Ignition Control Module on Chevrolet HHR?

To replace the Ignition Control Module, disconnect the ignition control module electrical connector, remove the ignition control module screws, take the module out from ignition coil housing. For installation, install the ignition control module into the ignition coil housing with the interconnect and seal properly aligned before fastening. Then fit in the ignition control module screws after which it should be tightened to 1.5 N.m (13 lb in) and lastly, plug-in the ignition control module electrical connector.

OEM Chevrolet HHR Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Control Modules found

View related parts
Chevrolet HHR Ignition Module
Part Number: 19300922
$107.29 MSRP: $220.48
You Save: $113.19 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Ignition Coil; Ignition Control Module; Coil Module; Module, Distributor (Also Knock Sensor)
- Replaces: 12580215
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Ignition Coil
Part Number: 12580538
$189.97 MSRP: $340.76
You Save: $150.79 (45%)
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; Ignition Module; Coil
- Replaces: 12569276
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet HHR | LS, LT | 4 Cyl 2.2 L GAS

Chevrolet HHR Ignition Control Module

Our website offers an extensive catalog of genuine Chevrolet HHR Ignition Control Module at unbeatable prices. Every OEM Chevrolet HHR Ignition Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Ignition Control Module Parts Questions & Experts Answers

Ignition Module
19300922
Q: How to replace the Ignition Control Module on Chevrolet HHR?
A: To replace the Ignition Control Module, disconnect the ignition control module electrical connector, remove the ignition control module screws, take the module out from ignition coil housing. For installation, install the ignition control module into the ignition coil housing with the interconnect and seal properly aligned before fastening. Then fit in the ignition control module screws after which it should be tightened to 1.5 N.m (13 lb in) and lastly, plug-in the ignition control module electrical connector.