How to replace the front wheel speed sensor on Chevrolet HHR?

Start by removing the left front wheel to reach the front Wheel Speed Sensor. Pull off vss electrical connector first then remove its retaining bolt for removing the sensor while keeping the vss. Discard the old o-ring. Before adding the new o-ring apply transmission fluid to its surface then put it in position. After this install the vss assembly according to the specified fastener instructions. Tighten the vss retainer bolt to 9 n.m (80 lb in). After that, attach the vss connector to the vss terminal and reinstall the left front wheel.

OEM Chevrolet HHR Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Speed Sensor found

View related parts
Chevrolet HHR Vehicle Speed Sensor
Part Number: 88893292
$61.53 MSRP: $116.85
You Save: $55.32 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Electronic Brake Control; Sensor, Speedometer Drive
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

Chevrolet HHR Wheel Speed Sensor

Our website offers an extensive catalog of genuine Chevrolet HHR Wheel Speed Sensor at unbeatable prices. Every OEM Chevrolet HHR Wheel Speed Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Wheel Speed Sensor Parts Questions & Experts Answers

Vehicle Speed Sensor
88893292
Q: How to replace the front wheel speed sensor on Chevrolet HHR?
A: Start by removing the left front wheel to reach the front Wheel Speed Sensor. Pull off vss electrical connector first then remove its retaining bolt for removing the sensor while keeping the vss. Discard the old o-ring. Before adding the new o-ring apply transmission fluid to its surface then put it in position. After this install the vss assembly according to the specified fastener instructions. Tighten the vss retainer bolt to 9 n.m (80 lb in). After that, attach the vss connector to the vss terminal and reinstall the left front wheel.