How to replace the front wheel speed sensor on 2010 Chevrolet HHR?

Before working on the front Wheel Speed Sensor you need to take off the left front wheel. Unplug the Vehicle Speed Sensor connector and remove its two retaining parts to take out the sensor. Discard the old o-ring. Apply transmission fluid on a fresh o-ring before putting it in place. After installing the vss assembly you must follow fastener security rules to fix the retainer bolt at 9 nm (80 lb in). Connect the vss electrical connector back to its component and install the left front wheel.

OEM 2010 Chevrolet HHR Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Speed Sensor found

View related parts
2010 Chevrolet HHR Vehicle Speed Sensor
Part Number: 88893292
$61.53 MSRP: $116.85
You Save: $55.32 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Electronic Brake Control; Sensor, Speedometer Drive
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.0 x 4.5 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88893292
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2010 Chevrolet HHR Wheel Speed Sensor

With a comprehensive array of OEM 2010 Chevrolet HHR Wheel Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Wheel Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the front wheel speed sensor on 2010 Chevrolet HHR?
A: Before working on the front Wheel Speed Sensor you need to take off the left front wheel. Unplug the Vehicle Speed Sensor connector and remove its two retaining parts to take out the sensor. Discard the old o-ring. Apply transmission fluid on a fresh o-ring before putting it in place. After installing the vss assembly you must follow fastener security rules to fix the retainer bolt at 9 nm (80 lb in). Connect the vss electrical connector back to its component and install the left front wheel.