How to replace the exhaust Camshaft Position Sensor on 2010 Chevrolet HHR?

The first step to replace the exhaust Camshaft Position Sensor consists of taking off the air cleaner assembly. Disconnect the exhaust camshaft position (CMP) sensor electrical connector and remove the cmp sensor bolt while keeping in mind that the intake cmp is demonstrated but the exhaust cmp follows the same procedure. Check the cmp sensor condition after removal. Replace it if damage is present. Prior to cmp sensor installation both intake and exhaust require an application of clean engine oil on the o-ring seal. Insert the cmp sensor bolt first then tighten it to 10 nm (89 lb in). After reinstallation of the air cleaner assembly you should reconnect the exhaust cmp sensor electrical connector last.

OEM 2010 Chevrolet HHR Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2010 Chevrolet HHR Camshaft Position Sensor, Green Line
Part Number: 12674704
$44.31 MSRP: $90.00
You Save: $45.69 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12577245
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 2.5 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12674704
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2010 Chevrolet HHR Camshaft Position Sensor

With a comprehensive array of OEM 2010 Chevrolet HHR Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the exhaust Camshaft Position Sensor on 2010 Chevrolet HHR?
A: The first step to replace the exhaust Camshaft Position Sensor consists of taking off the air cleaner assembly. Disconnect the exhaust camshaft position (CMP) sensor electrical connector and remove the cmp sensor bolt while keeping in mind that the intake cmp is demonstrated but the exhaust cmp follows the same procedure. Check the cmp sensor condition after removal. Replace it if damage is present. Prior to cmp sensor installation both intake and exhaust require an application of clean engine oil on the o-ring seal. Insert the cmp sensor bolt first then tighten it to 10 nm (89 lb in). After reinstallation of the air cleaner assembly you should reconnect the exhaust cmp sensor electrical connector last.