How to replace the ignition coil on 2010 Chevrolet HHR?

First, remove the air cleaner assembly to change the Ignition Coil. Then unplug the Ignition Coil electrical connector(s) and remove Ignition Coil bolt(s) before it is removed from the car. For installation purpose, re-insert the Ignition Coil(s) into its position, be sure to follow fastener caution guidances. Tighten the Ignition Coil bolt(s) to 10 nm ( 89 lb in ) , then reconnect the Ignition Coil electrical connector(s) and replace the air cleaner assembly back again.

OEM 2010 Chevrolet HHR Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2010 Chevrolet HHR Ignition Coil, Green Line Part Number: 12638824
$43.33 MSRP: $74.58
You Save: $31.25 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Direct Ignition Coil; Coil; Coil, Ignition Coil
- Replaced by: 25206788
- Replaces: 12629646, 12578224
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.4 x 3.2 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 12638824
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2010 Chevrolet HHR Ignition Coil

With a comprehensive array of OEM 2010 Chevrolet HHR Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Ignition Coil Parts Questions & Experts Answers

Q: How to replace the ignition coil on 2010 Chevrolet HHR?
A: First, remove the air cleaner assembly to change the Ignition Coil. Then unplug the Ignition Coil electrical connector(s) and remove Ignition Coil bolt(s) before it is removed from the car. For installation purpose, re-insert the Ignition Coil(s) into its position, be sure to follow fastener caution guidances. Tighten the Ignition Coil bolt(s) to 10 nm ( 89 lb in ) , then reconnect the Ignition Coil electrical connector(s) and replace the air cleaner assembly back again.