How to replace the knock sensor on 2010 Chevrolet HHR?

Home technicians need to elevate the vehicle properly then undertake the knock sensor replacement procedure. Locate the KS electrical connector before removing the KS bolt and extracting the KS from its location. Installation requires rotating the pigtail at a right angle to vertical before applying the fastener. Begin by installing the KS so you can tighten 25 Nm (18 lb ft) on the KS bolt. Settle the vehicle and complete the procedure by joining the KS electrical connector.

OEM 2010 Chevrolet HHR Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2010 Chevrolet HHR Knock Sensor
Part Number: 12621820
$17.18 MSRP: $32.26
You Save: $15.08 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaced by: 19434675
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12621820
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX

2010 Chevrolet HHR Knock Sensor

With a comprehensive array of OEM 2010 Chevrolet HHR Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the knock sensor on 2010 Chevrolet HHR?
A: Home technicians need to elevate the vehicle properly then undertake the knock sensor replacement procedure. Locate the KS electrical connector before removing the KS bolt and extracting the KS from its location. Installation requires rotating the pigtail at a right angle to vertical before applying the fastener. Begin by installing the KS so you can tighten 25 Nm (18 lb ft) on the KS bolt. Settle the vehicle and complete the procedure by joining the KS electrical connector.

Related 2010 Chevrolet HHR Parts

Alternate Year Models

2009 Chevrolet HHR Knock Sensor 2011 Chevrolet HHR Knock Sensor