OEM Chevrolet HHR Vehicle Speed Sensor

Chevrolet HHR Vehicle Speed Sensor Parts Questions & Experts Answers

• Vehicle Speed Sensor
  88893292
  Q: How to replace the Vehicle Speed Sensor on the 4T45-E Automatic Transaxle on Chevrolet HHR?

  A: The replacement procedure for the Vehicle Speed Sensor of the 4t45-e automatic transaxle starts with disconnecting the negative Battery Cable from its terminal. Raise and support the vehicle. Begin by removing the electrical connector from the Vehicle Speed Sensor and succeeding with extracting the retaining stud and sensor through straight pull-out movement to safeguard the case. Place the cleaned and dried Vehicle Speed Sensor into position alongside its retaining bolt then torque the stud to 12 n.m (97 lb in) for proper engagement. After reconnecting the speed sensor to its electrical connector you should remove safety stands before lowering the vehicle. To complete the procedure you should reconnect and tighten the terminal bolt of your negative Battery Cable to 15 n.m (11 lb ft).