How to replace the Vehicle Speed Sensor on the 4T45-E Automatic Transaxle on 2007 Chevrolet HHR?

To remove the Vehicle Speed Sensor in the 4t45-e automatic transaxles, one is supposed to disconnect the negative Battery Cable from the terminal of the battery. Lift and support the vehicle, then reduce the electrical connector at the vehicle speed sensors. Next unpack the retaining stud and after that the sensor which you pull straight out to prevent damage to the case. Drain and dry the Vehicle Speed Sensor prior to installing it with the retaining bolt, tighten the stud to 12 n.m (97 lb in). Reconnect the electric connector at the sensor, take out the safety stands, and lower the car. Lastly, reconnect the negative Battery Cable making sure that the terminal bolt is tightened to 15 n.m (11 lb ft).

OEM 2007 Chevrolet HHR Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2007 Chevrolet HHR Vehicle Speed Sensor
Part Number: 88893292
$61.53 MSRP: $116.85
You Save: $55.32 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Electronic Brake Control; Sensor, Speedometer Drive
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.0 x 4.5 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88893292
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2007 Chevrolet HHR Vehicle Speed Sensor

With a comprehensive array of OEM 2007 Chevrolet HHR Vehicle Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet HHR Vehicle Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the Vehicle Speed Sensor on the 4T45-E Automatic Transaxle on 2007 Chevrolet HHR?
A: To remove the Vehicle Speed Sensor in the 4t45-e automatic transaxles, one is supposed to disconnect the negative Battery Cable from the terminal of the battery. Lift and support the vehicle, then reduce the electrical connector at the vehicle speed sensors. Next unpack the retaining stud and after that the sensor which you pull straight out to prevent damage to the case. Drain and dry the Vehicle Speed Sensor prior to installing it with the retaining bolt, tighten the stud to 12 n.m (97 lb in). Reconnect the electric connector at the sensor, take out the safety stands, and lower the car. Lastly, reconnect the negative Battery Cable making sure that the terminal bolt is tightened to 15 n.m (11 lb ft).

Related 2007 Chevrolet HHR Parts

Alternate Year Models

2006 Chevrolet HHR Vehicle Speed Sensor 2008 Chevrolet HHR Vehicle Speed Sensor