Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Chevrolet HHR Vehicle Speed Sensor

VSS
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

  • 2006 Chevy HHR Vehicle Speed Sensor - 88893292
    2006 Chevy HHR Vehicle Speed Sensor Diagram - 88893292
    View related parts

    2006 Chevrolet HHR Vehicle Speed Sensor

    Part Number: 88893292
    $61.53 MSRP: $116.85
    You Save: $55.32 (48%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Electronic Brake Control; Sensor, Speedometer Drive
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 5.0 x 4.5 x 2.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 88893292
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Chevrolet HHR Submodels:
    • LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2006 Chevrolet HHR Vehicle Speed Sensor

With a comprehensive array of OEM 2006 Chevrolet HHR Vehicle Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet HHR Vehicle Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet HHR Parts Questions & Experts Answers

  • Q: How to replace the Vehicle Speed Sensor (VSS) on the 4T45-E Automatic Transaxle on 2006 Chevrolet HHR?
    A: Disconnection of the negative Battery Cable from the battery negative terminal should ensure safety precautions followed to replace the Vehicle Speed Sensor (VSS) belonging to 4t45-e automatic transaxle. Lift up the vehicle and disconnect the speed sensor's electrical connector. Remove the retaining stud and sensor by pulling it in a straight manner, as this will prevent you from damaging the case. Clean and dry new Vehicle Speed Sensor before installing it with retaining bolt and tighten it to the stud to 12 nm (97 inch lbs.). Re-establish the electrical connector at the sensor, take off the safety stands, and lower the driving vehicle. Finally, connect the negative Battery Cable securely with a bolt that is tightened to 15 nm (11 ft. Lbs.).

Related 2006 Chevrolet HHR Parts

Alternate Year Models

+
2007 Chevrolet HHR Vehicle Speed Sensor