How to replace the MAP Sensor on 2007 Chevrolet HHR?

The replacement process for the manifold absolute pressure sensor starts with the removal of the Throttle Body followed by disconnecting the evaporative emission system (EVAP) purge tube from the Intake Manifold. Begin by disassembling the wiring harness clips from the Fuel Rail before placing the harness away. Then disconnect the manifold absolute pressure (MAP) sensor electrical connector followed by removing its sensor. A damaged MAP Sensor seal requires replacement so carefully examine the seal for signs of damage. Begin the installation process by installing a new MAP Sensor seal if necessary then add the MAP Sensor and secure its electrical connector. After weaving the harness through the components place its clips onto the Fuel Rail then reattach the evap purge tube to the Intake Manifold before installing the Throttle Body.

OEM 2007 Chevrolet HHR MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2007 Chevrolet HHR M.A.P. Sensor
Part Number: 55573248
$30.16 MSRP: $56.65
You Save: $26.49 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.2 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55573248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet HHR M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2007 Chevrolet HHR MAP Sensor

With a comprehensive array of OEM 2007 Chevrolet HHR MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet HHR MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2007 Chevrolet HHR?
A: The replacement process for the manifold absolute pressure sensor starts with the removal of the Throttle Body followed by disconnecting the evaporative emission system (EVAP) purge tube from the Intake Manifold. Begin by disassembling the wiring harness clips from the Fuel Rail before placing the harness away. Then disconnect the manifold absolute pressure (MAP) sensor electrical connector followed by removing its sensor. A damaged MAP Sensor seal requires replacement so carefully examine the seal for signs of damage. Begin the installation process by installing a new MAP Sensor seal if necessary then add the MAP Sensor and secure its electrical connector. After weaving the harness through the components place its clips onto the Fuel Rail then reattach the evap purge tube to the Intake Manifold before installing the Throttle Body.