How to replace the Crankshaft Position Sensor on 2008 Chevrolet HHR?

You should start by removing the Starter to replace a Crankshaft Position Sensor. Start by disconnecting the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. Then unscrew the ckp sensor bolt and remove both the bolt and the sensor. First apply clean engine oil to the o-ring seal before installing the sensor. The installation process requires tight bolt screwing of the ckp sensor to an 89 lb in torque of 10 n.m. Reinstall the Starter after you reconnect the engine wiring harness electrical connector to the ckp sensor.

OEM 2008 Chevrolet HHR Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2008 Chevrolet HHR Crankshaft Position Sensor, Green Line
Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.3 x 1.1 inches
- Condition: New
- SKU: 12588992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2008 Chevrolet HHR Crankshaft Position Sensor

With a comprehensive array of OEM 2008 Chevrolet HHR Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2008 Chevrolet HHR?
A: You should start by removing the Starter to replace a Crankshaft Position Sensor. Start by disconnecting the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. Then unscrew the ckp sensor bolt and remove both the bolt and the sensor. First apply clean engine oil to the o-ring seal before installing the sensor. The installation process requires tight bolt screwing of the ckp sensor to an 89 lb in torque of 10 n.m. Reinstall the Starter after you reconnect the engine wiring harness electrical connector to the ckp sensor.