How to replace the intake camshaft position sensor on 2008 Chevrolet HHR?

The repair of intake Camshaft Position Sensor starts with removal of the air cleaner assembly. The first step is to disconnect the cmp sensor electrical connector before removing the cmp sensor bolt and cmp sensor from its position. A thorough examination for damage to the cmp sensor must occur before installation. After inspection you should replace the sensor if needed. Clean engine oil should be used to lubricate the cmp sensor o-ring seal before you install the sensor with its bolt fastened to 10 n.m (89 lb in). Connect the intake cmp sensor electrical connector before putting back the air cleaner assembly.

OEM 2008 Chevrolet HHR Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2008 Chevrolet HHR Camshaft Position Sensor, Green Line
Part Number: 12674704
$44.31 MSRP: $90.00
You Save: $45.69 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12577245
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 2.5 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12674704
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2008 Chevrolet HHR Camshaft Position Sensor

With a comprehensive array of OEM 2008 Chevrolet HHR Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the intake camshaft position sensor on 2008 Chevrolet HHR?
A: The repair of intake Camshaft Position Sensor starts with removal of the air cleaner assembly. The first step is to disconnect the cmp sensor electrical connector before removing the cmp sensor bolt and cmp sensor from its position. A thorough examination for damage to the cmp sensor must occur before installation. After inspection you should replace the sensor if needed. Clean engine oil should be used to lubricate the cmp sensor o-ring seal before you install the sensor with its bolt fastened to 10 n.m (89 lb in). Connect the intake cmp sensor electrical connector before putting back the air cleaner assembly.