How to replace the Crankshaft Position Sensor on 2009 Chevrolet HHR?

Replacements of the Crankshaft Position Sensor begin by taking out the Starter first. Start by detaching the engine wiring harness electrical connector from the Crankshaft Position Sensor and uninstall the sensor bolt and sensor. Clean engine oil should be used to lubricate the ckp sensor o-ring seal before putting in the ckp sensor. Use 10 nm (89 lbs in) torque when installing the ckp sensor bolt. After completing installation of the Starter connect the engine wiring harness electrical connector to the ckp sensor.

OEM 2009 Chevrolet HHR Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2009 Chevrolet HHR Crankshaft Position Sensor, Green Line
Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.3 x 1.1 inches
- Condition: New
- SKU: 12588992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2009 Chevrolet HHR Crankshaft Position Sensor

With a comprehensive array of OEM 2009 Chevrolet HHR Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet HHR Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2009 Chevrolet HHR?
A: Replacements of the Crankshaft Position Sensor begin by taking out the Starter first. Start by detaching the engine wiring harness electrical connector from the Crankshaft Position Sensor and uninstall the sensor bolt and sensor. Clean engine oil should be used to lubricate the ckp sensor o-ring seal before putting in the ckp sensor. Use 10 nm (89 lbs in) torque when installing the ckp sensor bolt. After completing installation of the Starter connect the engine wiring harness electrical connector to the ckp sensor.