How to replace the pushrods and valve rocker arm on 2006 Buick Rendezvous?

The valve Rocker Arm replacement process starts by removing the valve Rocker Arm covers followed by maintaining the component separation for correct assembly. First remove the bolts holding rocker arms and afterward remove both the rocker arms and pushrods from their locations. The pushrods should be installed to their original positions after applying gm p/n 1052356 or equivalent coating to their ends. The yellow-striped intake pushrods extend to 5 3/4 inches yet the green-striped exhaust pushrods reach 6 inches in length; verify that Pushrod placement occurs inside the lifter. Install the rocker arms according to the fastener notice in service precautions and then tighten the rocks arm bolts to 32 nm (24 ft. Lbs.). Reinstall the valve Rocker Arm covers as the last installation step.

OEM 2006 Buick Rendezvous Pushrod

Valve Push Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pushrods found

View related parts
2006 Buick Rendezvous Push Rods
Part Number: 10166354
$4.00 MSRP: $6.27
You Save: $2.27 (37%)
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Intake Push Rod
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.6 x 0.7 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 10166354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2006 Buick Rendezvous Push Rods
Part Number: 10166355
$3.95 MSRP: $6.20
You Save: $2.25 (37%)
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Exhaust Push Rod
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.9 x 0.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 10166355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS

2006 Buick Rendezvous Pushrod

With a comprehensive array of OEM 2006 Buick Rendezvous Pushrod, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rendezvous Pushrod are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the pushrods and valve rocker arm on 2006 Buick Rendezvous?
A: The valve Rocker Arm replacement process starts by removing the valve Rocker Arm covers followed by maintaining the component separation for correct assembly. First remove the bolts holding rocker arms and afterward remove both the rocker arms and pushrods from their locations. The pushrods should be installed to their original positions after applying gm p/n 1052356 or equivalent coating to their ends. The yellow-striped intake pushrods extend to 5 3/4 inches yet the green-striped exhaust pushrods reach 6 inches in length; verify that Pushrod placement occurs inside the lifter. Install the rocker arms according to the fastener notice in service precautions and then tighten the rocks arm bolts to 32 nm (24 ft. Lbs.). Reinstall the valve Rocker Arm covers as the last installation step.