How to replace the fuel pressure sensor on 2006 Cadillac DTS?

The replacement process for the Fuel Tank Pressure Sensor begins with removing the rear compartment liner and then the fuel sender access hole cover bolts and its associated cover. The fuel tank pressure sensor requires removal after you disconnect its electrical connector from the fuel level sensor wiring harness. The new installation process starts with adding the fuel tank pressure sensor followed by reattaching the fuel level sensor wiring harness electrical connector. Attach the fuel sender access hole cover while tightening its bolts to a torque of 2 N.m (18 lb in) in accordance with Service Precautions Fastener Notice. Finish the procedure by putting back the rear compartment liner.

OEM 2006 Cadillac DTS Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2006 Cadillac DTS Fuel Pressure Regulator, Passenger Side
Part Number: 16238399
$49.19 MSRP: $101.06
You Save: $51.87 (52%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Luxury, Platinum | 8 Cyl 4.6 L GAS

2006 Cadillac DTS Fuel Pressure Sensor

With a comprehensive array of OEM 2006 Cadillac DTS Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac DTS Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac DTS Parts Questions & Experts Answers

Q: How to replace the fuel pressure sensor on 2006 Cadillac DTS?
A: The replacement process for the Fuel Tank Pressure Sensor begins with removing the rear compartment liner and then the fuel sender access hole cover bolts and its associated cover. The fuel tank pressure sensor requires removal after you disconnect its electrical connector from the fuel level sensor wiring harness. The new installation process starts with adding the fuel tank pressure sensor followed by reattaching the fuel level sensor wiring harness electrical connector. Attach the fuel sender access hole cover while tightening its bolts to a torque of 2 N.m (18 lb in) in accordance with Service Precautions Fastener Notice. Finish the procedure by putting back the rear compartment liner.