OEM 2006 Cadillac SRX Dipstick Tube

2006 Cadillac SRX Dipstick Tube Parts Questions & Experts Answers

• Q: How to replace the Dipstick Tube and oil level indicator on 2006 Cadillac SRX?

  A: Execute the procedure by first shutting off the ignition and pulling out the oil level indicator from its tube. The subsequent step requires you to remove the bolt securing the oil level indicator tube before raising the vehicle. By removing the Knock Sensor and heat shield clip from the oil level indicator tube proceed with lowering the vehicle. Pull out the oil level indicator tube up through the Exhaust Manifold while carefully recording the position of the secondary heat shield as well as its orientation. Ategic replacement of the oil level indicator tube seal requires discarding the previous seal but not proceeding with additional tube replacement. Reinstall the oil level indicator with its tube while maintaining the correct position of the secondary heat shield according to the notes taken during removal. After raising the vehicle reinstall the Knock Sensor while refitting the heat shield clip to the oil level indicator tube according to previous installation steps. Finally, lower the vehicle.