OEM 2006 Cadillac SRX Washer Reservoir

2006 Cadillac SRX Parts Questions & Experts Answers

• Q: How to replace the washer reservoir on 2006 Cadillac SRX?

  A: Start your washer solvent container replacement by opening the hood then removing the container cap. Begin by detaching both lower air deflectors and the front bumper fascia before removing the side headlamp that matches your vehicle from rhd models or lhd models respectively. Release washer liquid from the container and disconnect the high-pressure liquid lines at the pumps. Pull out the washer solvent container electrical retainer clip then disconnect both washer pumps and the washer solvent level sensor electrical connectors. Lower the washer solvent container through the radiator support from its fasteners to extract it. Place the washer pumps plus washer level sensor onto a new washer container while adding both the horizontal bracket and washer container cap. Place the new washer solvent container with the filling neck up through the radiator support and fasten the electrical harness retainer clip in place. Add all necessary fasteners and tighten them to 6 n.m (53 lb in). Join washer hose and electrical wires to washer pumps as well as the washer solvent sensor. Place back the front bumper, headlights, and deflector under the car. Use a bolt to attach the washer solvent container filler neck to the top tie bar and tighten it to 6 n.m (53 lb in). Insert the washer solvent into the container then replace its cap while closing the hood.