How to replace the wiper motor on 2006 Chevrolet Cobalt?

You must begin by removing the air inlet grille panel before continuing with wiper drive system module replacement. After you disconnect the wiper crank arm from the wiper motor you need to remove its retaining nut. Detach the wiper motor screws and exit the wiper motor from the wiper drive system module. Put the wiper motor in its position on the wiper drive system module and fasten it with wiper motor screws while tightening them to 8 N.m (71 lb in). Install the wiper motor crank arm and nut while applying 25 N.m torque force (18 lb ft). After replacing the wiper components turn on the wiper setup device system and cover.

OEM 2006 Chevrolet Cobalt Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2006 Chevrolet Cobalt Wiper Motor
Part Number: 22664679
$134.04 MSRP: $238.28
You Save: $104.24 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Motor, Windshield Wiper Motor
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.3 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22664679
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet Cobalt Wiper Motor

With a comprehensive array of OEM 2006 Chevrolet Cobalt Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the wiper motor on 2006 Chevrolet Cobalt?
A: You must begin by removing the air inlet grille panel before continuing with wiper drive system module replacement. After you disconnect the wiper crank arm from the wiper motor you need to remove its retaining nut. Detach the wiper motor screws and exit the wiper motor from the wiper drive system module. Put the wiper motor in its position on the wiper drive system module and fasten it with wiper motor screws while tightening them to 8 N.m (71 lb in). Install the wiper motor crank arm and nut while applying 25 N.m torque force (18 lb ft). After replacing the wiper components turn on the wiper setup device system and cover.

Related 2006 Chevrolet Cobalt Parts

Alternate Year Models

2005 Chevrolet Cobalt Wiper Motor 2007 Chevrolet Cobalt Wiper Motor