How to replace the brake drum on 2006 Chevrolet Equinox?

Before replacing the Brake Drum you need to release the parking brake completely then jack up and support the vehicle. Pull off the wheel and tire unit before taking out the Brake Drum. Reinstall the Brake Drum using the rotor resurfacing kit to clean the hub/flange attachment surface of the Brake Drum. To improve installation you should carefully remove rust or corrosion from the drum's edge braking surface when needed. Use the wheel hub resurfacing kit (J 42450-A) to clean the wheel hub flange. After adjustment install the Brake Drum next put back the tire and wheel setup. Press the brake pedal three times to let Brake Shoe parts reach their right drum position.

OEM 2006 Chevrolet Equinox Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2006 Chevrolet Equinox Drum Part Number: 10304169
Product Specifications
- Other Name: Drum, Front And Rear Wheel Brake; Brake Drum
- Position: Rear
- Item Weight: 16.10 Pounds
- Item Dimensions: 14.4 x 13.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10304169
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS

2006 Chevrolet Equinox Brake Drum

With a comprehensive array of OEM 2006 Chevrolet Equinox Brake Drum, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox Brake Drum are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Brake Drum Parts and Q&A

Q: How to replace the brake drum on 2006 Chevrolet Equinox?
A: Before replacing the Brake Drum you need to release the parking brake completely then jack up and support the vehicle. Pull off the wheel and tire unit before taking out the Brake Drum. Reinstall the Brake Drum using the rotor resurfacing kit to clean the hub/flange attachment surface of the Brake Drum. To improve installation you should carefully remove rust or corrosion from the drum's edge braking surface when needed. Use the wheel hub resurfacing kit (J 42450-A) to clean the wheel hub flange. After adjustment install the Brake Drum next put back the tire and wheel setup. Press the brake pedal three times to let Brake Shoe parts reach their right drum position.