How to replace the rear brake line on 2006 Chevrolet Equinox?

Before starting the replacement procedure raise and support the vehicle before removing its tire and wheel assembly. Dust off all particles from both ends of the brake hose and from the brake pipe parts. The brake hose needs to be removed by connecting a second wrench to the brake pipe and slowly loosening the caps from both brake pipe and brake hose ends while keeping everything sealed to avoid fluid leakage and contamination. Take out the brake hose from its storage position by detaching both retaining clips from the mounting brackets. To set up the brake hose simply place it on the bracket system and include clips on every fitting point. Secure the brake pipe connection at the rear brake hose by tightening its fittings to 18 Nm (13 ft. lbs.) with a back up wrench on the hose fitting. Reattach the tire to its wheel and make sure the hose stays away from all suspension parts. If contact occurs take the hose out and fix the problem. End the process by draining the hydraulic brake system and lowering the vehicle.

OEM 2006 Chevrolet Equinox Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2006 Chevrolet Equinox Flex Hose, Front
Part Number: 22706714
$46.69 MSRP: $87.68
You Save: $40.99 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.2 x 3.1 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22706714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Flex Hose, Front
Part Number: 22706713
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 1.10 Pounds
- Item Dimensions: 21.1 x 3.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22706713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Flex Hose, Passenger Side
Part Number: 22706575
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.4 x 4.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22706575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Flex Hose, Driver Side
Part Number: 22706571
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 12.1 x 1.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22706571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS

2006 Chevrolet Equinox Brake Line

With a comprehensive array of OEM 2006 Chevrolet Equinox Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Brake Line Parts Questions & Experts Answers

Q: How to replace the rear brake line on 2006 Chevrolet Equinox?
A: Before starting the replacement procedure raise and support the vehicle before removing its tire and wheel assembly. Dust off all particles from both ends of the brake hose and from the brake pipe parts. The brake hose needs to be removed by connecting a second wrench to the brake pipe and slowly loosening the caps from both brake pipe and brake hose ends while keeping everything sealed to avoid fluid leakage and contamination. Take out the brake hose from its storage position by detaching both retaining clips from the mounting brackets. To set up the brake hose simply place it on the bracket system and include clips on every fitting point. Secure the brake pipe connection at the rear brake hose by tightening its fittings to 18 Nm (13 ft. lbs.) with a back up wrench on the hose fitting. Reattach the tire to its wheel and make sure the hose stays away from all suspension parts. If contact occurs take the hose out and fix the problem. End the process by draining the hydraulic brake system and lowering the vehicle.